Panasonic CZ-RWSK2 Quick Reference

Also see for CZ-RWSC3: Installation instructions Operating instructions Operating instructions Quick reference Operating instructions

Contents

Panasonic CZ-RWSK2 Quick Reference Manual pdf 4 page image

4Part NamesREMOTE CONTROLLER12345678910121113141516One remote controller can control a group ofup to eight indoor units.1. Operation DisplayDisplays the operation status. (The figureshows all the statuses.)• The auto-flap display may be different,depending on the installed unit.2. Start/Stop buttonPressing this button once starts andpressing again stops the operation.3. Fan speed button4. Swing/Wind Direction button5. Timer setting buttonUse for operating with a timer.6. Reset buttonUse this button after changing the batteries.7. CoverPress at the top center and then slidedown.8. Transmitter9. Remote control sensorDetects the temperature at the remotecontroller when detection has beenswitched to the remote controller by thesensor button.10.Temperature setting buttonsraises the temperature setting 1 °Cat a time.lowers the temperature setting 1 °Cat a time.11. Filter buttonCZ-RWSC3Press to turn off the filter lamp on thereceiver.12.Mode Select buttonPress to switch the operation mode.13.Ventilation buttonUse this when connected to an aftermarketfan. Pressing this button starts and stopsthe fan. When the air conditioner is startedor stopped, the fan starts or stops at thesame time. ( appears on the display ofthe remote controller when the fan isoperating.)14.Address button15.Sensor buttonUsed this to activate the temperaturesensor on the remote controller instead ofthe one on the indoor unit. The temperaturesensor on the indoor unit is selected beforeshipment. At this time is shown on thedisplay.16.Clock buttonUse this to set the clock.From this page, the names of remotecontroller’s buttons will be indicated with theabove illustrations.E.g.: Start/Stop button 