Panasonic D-Snap SV-AV100 Operating Instructions Manual

Also see for D-snap SV-AV100: Operating instructions Operating instructions

TNª About RecoveryWhen you access to a card in MPEG2 mode and faulty control information or play listinformation is found, the following messages may appear. (When activating the recoveryfunction, it may take time depending on the error.)Recovery of control information:[Found error in control information.Recommend to connect AC adapter.]After the above message, the confirmationscreen [Repair data now?] appears.[Yes]When connecting to AC adaptor or theremaining capacity of the battery isenough:#The management information isrecovered properly.When the remaining capacity of thebattery is low:#[Please connect AC adapter or changebattery.][No]#[Control information error. Cannot usethis card in MPEG2 mode.]Deletion of PlayList:[Found error in PlayList. Delete errorPlayList now?] or [Found error inPlayList. Delete all PlayList now?][Yes]When connecting to AC adaptor or theremaining capacity of the battery isenough:#The play lists with errors or all play listsare deleted.When the remaining capacity of thebattery is low:#[Please connect AC adapter or changebattery.][No]#[PlayList error. Cannot use this card inMPEG2 mode.]≥When you recover files, you can record or play MPEG2 moving pictures again. Therefore,be sure to follow the instruction. However, when the recording time is less than 1 secondin Fine or 1.5 second in Normal, the movie files cannot be recovered.≥When you delete error play lists or all play lists, you can record or play MPEG 2 movingpictures again. Be sure to delete them.≥If you recover the data recorded by other equipment on the SD Video Camera, the datamay not be played on other equipment.