Panasonic DBS576 User Manual

Also see for DBS 576 Section 300: User guide Technical manual Technical manual Technical manual User guide

Contents

Panasonic DBS576 User Manual Manual pdf 81 page image

6. Using Additional Features576-51-750 DBS 576 issued April 2002 81USING VOICE RECOGNITIONWith the installation of additional hardware, you can use verbal commands to dialextensions, speed dial numbers, and access various phone features.Note: This feature requires system programming and addition hardware (VB-44224Telephone and VM-44101 Voice Recognition Adaptor). For more information, seeyour system administrator or dealer.USING THE FLASH FEATUREYou can send a signal to your phone to release an outside line by pressing theFLASH key or the PROG key. Once you press either key, your phone will eitherreseize the same outside line or switch to extension dial tone status.Note: This feature requires system programming. For more information, see yoursystem administrator or dealer.MAKING CONFERENCE CALLSYou can use your phone to create conference calls that include up to eight parties.The conference call can have any combination of extensions and outside lines, butmust include at least one extension.Note: The maximum number of parties in a conference call is determined bysystem configuration. For more information, see your system administrator or dealer.1. While on a call, press the HOLD key or the outside line key you are using.2. If adding an outside party, press a vacant CO key or dial a trunk access code.3. Dial the number of the party you want to add to the call.4. Press the CONF key when your call is answered. This adds the party to the calland establishes the conference.5. To add another party repeat steps 1-4.Note: If the originating party hangs up, all conference calls will be terminated.Hang up or press the FLASH key or the ON/OFF key.To establish a conference callTo drop out of a conference call