Recording34 DVQX1052 (ENG)∫ Adjusting the AF Custom settings1 Press 2/1 to select the AF Custom setting.2 Press 3/4 to select the items, and then press 2/1 to adjust.• Pressing [DISP.] will return the default setting.3 Press [MENU/SET].Setting the Auto Focus ModeApplicable modes:This allows the focusing method that suits the positions andnumber of the subjects to be selected.Press [ ].• You can also use the button as a function button. (P29)[AF Sensitivity] Sets the sensitivity to be applied when adjusting the focusaccording to the movement of the subject.[AF Area SwitchingSensitivity]Sets the sensitivity level at which the camera switches or movesthe AF area to suit the movement of the subject.[Moving objectprediction]Sets the level at which object motion detection is activated inresponse to a change in the speed of the subject.([Face/EyeDetection])The camera automatically detects the person’s face and eyes.An eye closer to the camera will be in focus, while the exposure will beoptimized for the face.(When [Metering Mode] is set to [ ])• Up to 15 faces can be detected. Eyes that can be detected are onlythose of the face that is in focus.• You can change the eye to be in focus by touchingthe eye in the yellow area.• If you touch [ ] or press [MENU/SET], the eyefocus setting will be canceled.([Tracking])The camera focuses on the subject you specify.The exposure will be optimized for the subject.(When [Metering Mode] is set to [ ])Focus and exposure will keep on following thesubject even if it moves. (Dynamic tracking)• Aim the AF tracking area over the subject to be tracked, and press theshutter button halfway to lock the subject.• Lock is canceled when [MENU/SET] is pressed.ョㄏピ