Panasonic DMC-F7PP Operating Instructions Manual

Also see for DMC-F7PP: User guide Operating instructions

Contents

28Recording Motion Images[Preparations]• Insert the card. (P16)• Set the REC/power switch to [ON]. (P18)1 Press the [MENU] button.2 Press 3/4 to select [MOTIONIMAGE].3 Press 2/1 to select [ON].4 Center the subject on the LCDmonitor and press the shutter buttonhalfway.• Adjust the focus.5 Pressing the shutter button fully, therecording starts.• During recording, the status indicatorblinks.• Audio is not recorded.• Picture size is set at 320 × 240 pixels.6 Pressing the shutter button fullyagain, recording stops.• If during the recording the memory ofthe card becomes full, the recordingis stopped automatically.ªAvailable settings in motion image mode•Macro mode (P42)•Unlimited recording•Spot recording• The remaining time displayed on the LCD monitor is the approximation.• It is possible to record motion images maximum of 20 seconds.• After recording motion images, the status indicator blinks while the images arerecorded to the memory card, and after recording completion it lights. Do notoperate during the recording.• When setting [MOTION IMAGE] to [ON], you cannot select [BURST],[PICT.SIZE], [QUALITY] and [D.ZOOM].• If using the MultiMediaCard, after recording motion images, the screen mayappear grey, but this is not a malfunction.• When recording is started, the auto focus and zoom are locked (with the firstframe).2,314,5