Advanced (Recording pictures)- 68 -[BABY1] / [BABY2]This takes pictures of a baby with a healthy complexion. When you use the flash, the lightfrom it is weaker than usual.It is possible to set different birthdays and names for [BABY1] and [BABY2]. You canselect to have these appear at the time of playback, or have them stamped on therecorded image using [TEXT STAMP] (P103). Birthday/Name setting1 Touch [SET] of [AGE] or [NAME].2 Enter the birthday or name.Birthday: Touch [e]/[r] for each item to set year/month/day,and touch [SET].Name: For details on how to enter characters, read the“Entering Characters” section on P94.• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].• If [ON] is selected when the birthday or name has not been registered, the settingscreen appears automatically.3 Touch [EXIT] to finish. To cancel [AGE] and [NAME]Select the [OFF] setting in step 1 of the “Birthday/Name setting” procedure.Note• The age and name can be printed out using the “PHOTOfunSTUDIO” bundled softwareon the CD-ROM (supplied).• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, theage or name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].• The focus range is 5 cm (0.17 feet) (Wide)/1.0 m (3.28 feet) (Tele) to 7.• When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER]is set to [OFF], the shutter speed becomes a maximum of 1 second.• [,] is activated, and maximum ISO sensitivity level becomes [ISO1600].• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayedat the lower left of the screen for about 5 seconds, along with the current date and time.• If the age is not properly displayed, check the clock and birthday settings.• The birthday setting and name setting can be reset with [RESET].• The initial setting for [AF MODE] is [3].Downloaded from ManualsCamera.com Manuals