VQT2C7084Connecting to other equipmentPrinting the PicturesIf you connect the camera to a printer supporting PictBridge, you can select the pictures tobe printed out and instruct that printing be started on the camera’s LCD monitor.Preparations:Turn on the camera and the printer.Remove the card before printing the pictures in the built-in memory.Perform the print quality and other settings at the printer before printing the pictures.A USB connection cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straight out.(Otherwise the connectors may be bent out of shape which will cause trouble.)B Align the marks, and insert.• Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DCcoupler (DMW-DCC4; optional). If the remaining battery power becomes low while the cameraand the printer are connected, the status indicator blinks and the alarm beeps. If this happensduring printing, stop printing at once. If not printing, disconnect the USB connection cable.Connect the camera to a printer via the USB connection cable A (supplied).• When the camera is connected to the printer, the cable disconnect prohibit icon [å]appears. Do not disconnect the USB cable while [å] is displayed.Note• This unit cannot stand upright when the AC adaptor is connected. When operating it on a flatsurface, we recommend placing it on a soft cloth.• Do not use any other USB connection cables except the supplied one.Use of cables other than the supplied USB connection cable may cause malfunction.• Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).• Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.• You cannot switch between the built-in memory and the card while the camera is connected tothe printer. Disconnect the USB connection cable, insert (or remove) the card and then connectthe USB connection cable to the printer again.Press 3/4 to select [PictBridge(PTP)], and thenpress [MENU/SET].DIGITALAV OUTUSB MODESELECT SETPLEASE SELECTTHE USB MODEPictBridge(PTP)PC