Panasonic DMC-LS6 Owner's Manual

Contents

- 68 -Q&A TroubleshootingRecording (Continued)Recorded pictures appear coarse, or there is interference.● ISO Sensitivity is high, or shutter speed is low.(Default [Sensitivity] setting is [AUTO] – interference may appear with indoor pictures.)→ Lower [Sensitivity] (→43).→ Take pictures in brighter locations.● Camera is set to [High Sens.].(Picture becomes slightly coarser in response to high sensitivity.)Brightness or coloring of recorded picture different from real life.● When recording under fluorescent or LED lighting fixture etc., increasing the shutterspeed may introduce slight changes to brightness and color. These are a result of thecharacteristics of the light source and do not indicate a malfunction.Red banding may appear on the LCD monitor or part or the entirescreen may have a reddish tint, when recording or pressing theshutter button halfway.● This is a characteristic of CCD and may appear if subject containsbrighter areas. Some blurring may occur around these areas, but thisis not a fault. This will be recorded in motion pictures, but not in stillpictures.● We recommend keeping the screen away from strong light sourcessuch as sunlight when taking pictures.Motion picture recording stops midway.● With some cards, access display may appear briefly after recording, and recording mayend midway.● When recording motion picture, use a card rated with an SD speed class* of “Class 6”or higher.* SD speed class refers to a specification for sustained write speeds.● If recording stops even when using a card with speed of “Class 6” or faster, the datawriting speed is low. We recommend backing up the data on the memory card andreformatting it. (→28)The beep volume is low.● The speaker is blocked.