- 105 - VQT4K59Message displaysMeanings of and required responses to major messages displayed on LCD monitor.[This memory card cannot be used]● A MultiMediaCard was inserted.→ Not compatible with the camera. Use a compatible card.[Some pictures cannot be deleted] [This picture cannot be deleted]● Non-DCF pictures (→36) cannot be deleted.→ Save needed data on a computer or other device, and then use [Format] on the camera. (→49)[No additional selections can be made]● The number of pictures that can be deleted at once has been exceeded.● The number of pictures allowing [Resize] (multiple settings) at once has been exceeded.[Please turn camera off and then on again] [System Error]● The lens is not working correctly.→ Turn on power again.(Consult the dealer or your nearest Service Center if display still remains.)[Some pictures cannot be copied] [Copy could not be completed]● Pictures cannot be copied in following cases.→ Picture of same name already exists in built-in memory when copying from card.→ File is not of DCF standard. (→36)→ Picture taken or edited on a different device.[Not enough space on built-in memory] [Not enough memory on the card]● There is no space left on the built-in memory or the card. When you copy pictures from the built-inmemory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.[Built-In Memory Error] [Format built-in memory?]● Displayed when formatting built-in memory via computer, etc.→ Reformat directly using camera. Data will be deleted.[Memory card error. This card cannot be used in this camera. Format this card?]● The card format cannot be used with this camera.→ Save needed data on a computer or other device, and then use [Format] on the camera. (→49)
