∫ Adjusting the monitor angle• Be careful not to catch your finger, etc. in the monitor.• When rotating the monitor, be careful not to apply too much force or drop the camera.This may cause scratches and malfunctions.• If the monitor is rotated as shown inthe illustration, the Self Shot Modestarts.• Check that the camera is turned off.Names of Main Parts1 Shutter button2 Motion picture button3 Zoom lever4 Flash5 Camera [ON/OFF] button6 Lens7 Self-timer indicator/AF Assist Lamp8 Lens barrel9 Lens barrier: Microphone; Charging lampWi-Fi® connection lamp< Monitor= [MODE] button> [MENU/SET] button? [(] (Playback) button@ SpeakerA Strap eyeletB [AV OUT/DIGITAL] socketC [Wi-Fi] buttonD Cursor buttons3(È)/4(DISP.)/2(ë)/1(‰)E [Q.MENU] button[ ] (Delete) button[ ] (Cancel) buttonF Tripod mountG Card/Battery doorH Release lever1 Flip up the bottom of themonitor lightly to open.2 Adjust the angle ofthe monitor. When closing• When not using this unit,close the monitor completelyback to the original position.PreparationsSD Memory Card (optional)• The following cards, which conform to the SD standard, can be used with this unit.(These cards are indicated as card in the text.)SD Memory Card (8 MB to 2 GB)SDHC Memory Card (4 GB to 32 GB)SDXC Memory Card (48 GB, 64 GB) MODEQ.MENUTo power outletBattery PackUSBConnectionCableAC AdaptorStrap eyelet• To prevent dropping, be sureto attach the supplied strapand fit it to your wrist.Charging lampHand Strap