2 Connecting the camera to the smartphone/tablet (Remote Shooting)1 Installing the smartphone/tablet app “Image App”Image AppImage AppImage AppYou can connect Wi-Fi ® compatible devices to the camera wirelessly.You can connect them directly or via a wireless access point.When connecting the camera to asmartphone/tablet directlySelect “Google Play TM Store”.Select “App Store SM ”.Android TMiOSWhen connecting the camera to a TV orPC, etc. via a wireless access pointTo change the connection method, press [DISP.].(Such as [WPS Connection], [Via Network], etc.)Please refer to “Owner’s Manual for advanced features” (PDF) for details.SSID refers to the name that is used to identify a network over a wireless LANconnection. If the SSID matches for both devices, transmission is possible.WPS (Wi-Fi Protected Setup TM) refers to a function that allows you to easily configurethe settings related to the connection and security of wireless LAN devices .Android and Google Play are trademarks or registered trademarks of Google Inc.App Store is a service mark of Apple Inc.“Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks of the Wi-Fi Alliance.DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living NetworkAlliance.Connecting the camera to a smartphone/tabletLet’s connect to the Wi-FiVQC9362Wi-Fi ® Connection GuideThe camera is not capable of connecting to a wireless network via publicwireless LAN.Digital CameraModel No. DMC-TS5Read the [Help] in the “Image App” menu for further details on how to operate.Operation on the smartphone/tabletOperation on the camera1436 725Operation on the smartphone/tabletSelect [New Connection].Select the same SSID asthe one displayed on thescreen in step 3.Select [Remote Shooting].Enter the passworddisplayed on the screenin step 3, and connect.The SSID and passwordare displayed.Start “Image App” onyour smartphone/tablet.When the connection isestablished, the recordingscreen is displayed. Press camera [ON/OFF] button. Press [Wi-Fi].On the setting menuof your smartphone/tablet, turn on the Wi-Fifunction.The service may not be able to be used properly depending on thetype of smartphone/tablet being used. For compatible devices, seethe following support site.http://panasonic.jp/support/global/cs/dsc/(This Site is English only.)When downloading the app on a mobile network, high packet communicationfees may be incurred depending on the details of your contract.You can select the settingyou used before from [HistoryConnection].Please refer to “Owner’s Manualfor advanced features” (PDF) fordetails.Make sure the Wi-Fi connectionlamp is lit blue.Lit blue:The Wi-Fi connection is on standbyBlinking blue:Sending/receiving data through theWi-Fi connection1234Connect the smartphone/tablet to a network.Enter “Image App” into the search box.Select “Image App” and install it.SEE REVERSE SIDE( The following is an example of when Android is being used.Screens vary depending on your OS.)Supported OSFor Android apps: Android 2.2 ~ Android 4.2For iOS apps: iOS 4.3 ~ iOS 6.0You can record/playback byusing the smartphone/tablet.You can also save picturesin the camera on thesmartphone/tablet.If you perform steps 1 and 2 whileperforming single image playback onthe camera, you can easily transferthe image to the smartphone/tablet.Launch “Image App” onthe smartphone/tablet.1This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later). (excluding some models)Connect by using the NFC functionConnecting manuallyIf the camera is notrecognized even whentouching the smartphone/tablet, change positionsand try again.Do not touch this camerato the smartphone/tabletstrongly.For information on theoperation and settingsof NFC-compatiblesmartphones/tablets, referto the operating instructionsof your device.[When connecting for the first time]When the connection screen is displayed, select [Yes], and touch [ ] onthe smartphone/tablet again.2Touch the smartphone/tabletto [ ] of the camera.