Panasonic DMC-TZ7EB Service Manual

328.4. Disassembly Procedure for theLensNOTE: When Disassembling and Assembling for the Lens1. To minimize the possibility of the CCD being dirt, performdisassemble and/or assemble under the condition of theCCD is being mounted.Disassembling procedures for the CCD unit, refer to item8.6.2. Take care that the dust and dirt are not entered into thelens.In case of the dust is putted on the lens, blow off them byairbrush.3. Do not touch the surface of lens.4. Use lens cleaning KIT (BK)(VFK1900BK).5. Apply the grease to the point where is shown to" Greaseapply" in the figure.8.4.1. Removal of the Zoom Motor Unitand Master Flange Unit1. Remove the libs (5 points).2. Unscrew the 5 screws (A).3. Unscrew the 1 screw (B).4. Unscrew the 1 screw (C).5. Unscrew the 1 screw (D).6. Remove the zoom motor unit.7. Remove the master flange unit.