42 VQT1Z82Changing recording information displayChange between different LCD monitor displays, such as histograms.HistogramDisplays distribution of brightness in picture– e.g. if the graph peaks at the right, this means there areseveral bright areas in the picture. (Guide) A peak in the centerrepresents correct brightness (correct exposure). This can beused as a reference for exposure correction (P.49), etc.• Histogram from time of recording is different to histogramin playback and displayed in orange, when recording withflash or in dark locations. Also, histogram may differ fromhistograms made with image editing software.• Histograms cannot be displayed in (INTELLIGENT AUTO Mode), (CLIPBOARD Mode),MULTI ASPECT , or during playback zoom.• This is not displayed during motion picture recording.Guide lines• Reference for composition(e.g. balance) when recording.• INTELLIGENT AUTO Mode and CLIPBOARD Modedisplay only.• This is not displayed in ‘MULTI ASPECT’ Mode.Judge balance Judge center ofsubjectDuring playback zoom, motion picture playback, slideshow: Display on/offDuring menu display, multi playback or calendar playback: Display cannot be changed.Press to change display(Example)OKDark← → BrightIn recording modeRecordinginformation 1Motion picture recordinginformation 1, 2 No display Guide lines 1, 3In playback mode 1 Set ‘HISTOGRAM’ to ‘ON’ to displayhistogram (P.22).2 • Return to the ‘Recordinginformation’ display by pressing theshutter button halfway.• Displayed when recording motionpictures instead of the left screen.3 Select guide line pattern andrecording information display on/offwith ‘GUIDE LINE’ setting (P.22).• When is in use, recordinginformation and guide lines cannot bedisplayed simultaneously.Recordinginformation No displayRecording informationor histogram 1Downloaded From camera-usermanual.com Panasonic Manuals