Panasonic DMCFH3 - DIGITAL STILL CAMERA Operating Instructions Manual

Also see for DMC-FH3P: Basic operating instructions Specifications Service manual

Contents

Preparation- 28 -• Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler(optional) when formatting. Do not turn the camera off during formatting.• If a card has been inserted, only the card is formatted. To format the built-in memory, removethe card.• If the card has been formatted on a PC or other equipment, format it on the camera again.• It may take longer to format the built-in memory than the card.• If the built-in memory or the card cannot be formatted, consult your nearest Service Center.• If you set a different language by mistake, select [~] from the menu icons to set the desiredlanguage.• The Stabilizer function is switched between [ON] and [OFF] every time [MENU/SET] is pressedduring the [STABILIZER DEMO.].• In Playback Mode, [STABILIZER DEMO.] cannot be displayed.• [STABILIZER DEMO.] is an approximation.• Press [DISPLAY] to close [STABILIZER DEMO.].• [AUTO DEMO] has no TV output capability even when it is in Playback Mode.• Press [MENU/SET] to close [AUTO DEMO].[FORMAT] The built-in memory or card is formatted. Formatting irretrievablydeletes all the data so check the data carefully before formatting.~ [LANGUAGE] Set the language displayed on the screen.[DEMO MODE]Displays the amount of jitter the camera has detected([STABILIZER DEMO.])The camera’s features are displayed as Slide Shows. ([AUTODEMO])[STABILIZER DEMO.]A Amount of jitterB Amount of jitter after correction[AUTO DEMO]:[OFF][ON]For Canadian assistance, please call:1-800-99-LUMIX (1-800-995-8649) orsend e-mail to: lumixconcierge@ca.panasonic.comFor USA and Puerto Rico assistance, please call:1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfoDEMOA B