Panasonic DMP-BD10A Operating Instructions Manual

Also see for DMPBD10A - BD/DVD PLAYER: Operating instructions Operating instructions

Panasonic DMP-BD10A Operating Instructions Manual Manual pdf 18 page image

18RQT8997Linked operations with the TV(EZ SyncTM “HDAVI ControlTM”)EZ Sync “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or amplifier/receiverunder “HDAVI Control”. You can use this function by connecting the equipment with the HDMI cable. See the operating instructions forconnected equipment for operational details.If you connect this unit to the TV that has “HDAVI Control 2” function with an HDMI cable, you can operate this unit using the following buttonson the TV remote control.[, , , ], [OK], [RETURN], [SUB MENU] and colored buttons.Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.Refer to the TV operating instructions for operating TV.What is EZ Sync “HDAVI Control”?Preparation EZ Sync “HDAVI Control”, based on the control functions providedby HDMI which is an industry standard known as HDMI CEC(Consumer Electronics Control), is a unique function that we havedeveloped and added. As such, its operation with othermanufacturers’ equipment that supports HDMI CEC cannot beguaranteed.1. Connect this unit to your TV or amplifier/receiver with an HDMIcable (➡ 8–9).2. Set “Ctrl with HDMI” to “On” (➡ 23).(The default setting is “On”.)3. Set the “HDAVI Control” operations on the connected equipment(e.g., TV).When using HDMI2 terminal of VIERA as “HDAVI Control”,set the input channel to HDMI2 on VIERA.4. Turn on all “HDAVI Control” compatible equipment and select thisunit’s input channel on the connected TV so that the “HDAVIControl” function works properly.Also when the connection or settings are changed, repeat thisprocedure.This unit supports “HDAVI Control 2” function.“HDAVI Control 2” is the newest standard (current as of February,2007) for Panasonic’s HDAVI Control compatible equipment. Thisstandard is compatible with Panasonic’s conventional HDAVIequipment.It is recommended that you use Panasonic’s HDMI cable.Recommended part number:RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50(5.0 m/16.4 ft.), etc.Non-HDMI-compliant cables cannot be utilized.What you can do with “HDAVI Control”One touch playYou can turn on this unit, television and amplifier/receiver, andstart playing the disc in the play position with a single press of abutton.Press [ONE TOUCH PLAY].When operating, point the remote control at the remote controlsignal sensor on the main unit.When [ONE TOUCH PLAY] or [] (PLAY) is pressed on this unitfor “Automatic input switching” or “Power on link”, the playbackimage is not immediately displayed on the screen and it may notbe possible to watch the contents from where playback started.In this case, press [] or [] to go back to where playbackstarted.Automatic input switchingWhen the following operations are performed the television willautomatically switch the input channel and displays thecorresponding action.–When play starts on the unit–When an action that uses the display screen is performed(e.g., Direct Navigator screen)Power on linkWhen the television is off and the following operations areperformed, the television will automatically turn on and displaysthe corresponding action.–When play starts on the unit–When an action that uses the display screen is performed (e.g.,Direct Navigator screen)Power off linkAll connected equipment compatible with “HDAVI Control”including this unit automatically turns off when you switch thetelevision off.This unit automatically turns off even during playback or anyother operation.Only this unit turns off when you press the power button of theunit or the remote control for shutting it down. Other connectedequipment compatible with “HDAVI Control” stays on.Easy control only with VIERA remote controlUsing the SUB MENU window to operate this unit Using the Control PanelBy using the TV remote control, you can play discs using the“Control Panel” (➡ below) and display the Top Menu (for BD-Videoand DVD-Video) or Pop-up Menu (for BD-Video). Press [SUB MENU].This can also be displayed by using the VIERA menu screen.[Note] You cannot use the SUB MENU while the Top Menu for BD-Video or DVD-Video is displayed. Select an item then press [OK].Using the Control Panel, you can operate search backward, searchforward, stop, etc, with the TV remote control.Perform steps and of “Using the SUB MENU window to operatethis unit” (➡ left).The Control Panel is displayed (➡ right).When playing BD-Video or DVD-Video, etc.–[]: Pause, []: Stop, [ ]: Searchbackward, []: Search forward, [OK]: Play.While playing still pictures–[]: Stop, [ ]: View previous picture,[]: View next picture. When you want to leave the TV on and set only this unitto standby modePress [ BD POWER] on this unit’s remote control and set tostandby mode. When not using “HDAVI Control”Set “Ctrl with HDMI” in the Setup menu to “Off” (➡ 23)ENTERControl PanelPop-up MenuTop Menue.g.Control Panel Control Panel is displayed(➡ right).Top Menu[BD-V] [DVD-V]Top menu is displayed(➡ 15).Menu[DVD-V]Menu is displayed(➡ 15).Pop-up Menu[BD-V]Pop-up menu is displayed(➡ 15).Rotate Right [JPEG] Rotate the still picture(➡ 17).Rotate Left [JPEG]Zoom in [JPEG] Enlarge or shrink the stillpicture (➡17).Zoom out [JPEG]PlaySearchPauseSearchStopControl PanelPlayback Linked operations with the TV