Panasonic DMP-BD10A Operating Instructions Manual

Also see for DMPBD10A - BD/DVD PLAYER: Operating instructions Operating instructions

Panasonic DMP-BD10A Operating Instructions Manual Manual pdf 23 page image

23RQT8966§ “Language” can only be selected in the United Kingdom, Republic of Ireland and Continental European models.Tabs Menus Options (Underlined items are the factory presets.)Connection(continued )TV SystemChange the setting to match the equipment you areconnecting with.≥If picture output is not smooth, change the setting.≥PAL: Select when connecting to a PAL or multi-systemtelevision. NTSC discs are played as PAL60.]BD-V] This unit cannot convert BD-Video fromNTSC signals to PAL60 signals; therefore videocannot be displayed properly when you connectthis unit to the AV terminal, VIDEO terminal or SVIDEO terminal.≥NTSC: Select when connecting to a NTSC television.NTSC discs are played as NTSC.AV OutputChoose the video signal format to be output from the AVterminal.≥Video (with component): Select when a TV is connectedthat can receive a compositesignal.≥S Video (with component): Select when a TV is connectedthat can receive an S Videosignal.≥RGB (without component): Select when a TV is connectedthat can receive an RGB signal.Component ResolutionThis sets the video output resolution when using thecomponent video terminal.Set according to the signal and terminal of the connectedTV.≥576i/480i ≥576p/480p≥720p ≥1080i480i, 480p: When playing NTSC discs576i, 576p: When playing PAL discsSpeakerYou can set the unit to output the best possible sound foryour speakers. Select “2-Channel” if the speaker settingscan be set on the connected equipment.≥Multi-channel: When using three or more speakers withequipment that cannot set the speakersettings.You can adjust the settings for speaker size,presence, channel balance and audio-delay.(➡ 24)≥2-Channel: When using two speakers.≥Attenuator: When audio is output from 2ch or 7.1chAUDIO OUT terminals and sound is distorted.≥On ≥OffHDMI HDMI Video ModeSelect “On” when video is output from HDMI AV OUTterminal.≥On : [Note]: Video from COMPONENT VIDEO OUT terminalis output as “576i/480i” if this is selected.≥Off: Select this when connected through the COMPONENTVIDEO OUT terminal. Also, select this when connectedthrough the AV terminal and “RGB (withoutcomponent)” (➡ above, “Connection” tab) is selected.HDMI Video FormatYou can only select settings compatible with the connectedequipment. This setting normally does not need to bechanged. However if you are concerned about output picturequality, it may be improved by changing the setting.Still pictures play at a resolution equivalent to 576p/480pregardless of the settings.≥Automatic: Automatically selects the output resolution bestsuited to the connected television (1080p, 1080i,720p or 576p/480p).≥576p/480p≥720p≥1080i≥1080pHDMI Output RangeEffective when connected to a device that only supportsRGB output.≥Standard :≥Enhanced: When the black and white images are not distinct.HDMI Audio OutputThis setting selects whether or not to output audio fromHDMI.[Note]: If “On” is selected, audio output from the 7.1ch AUDIOOUT terminal will match the number of channels onthe equipment connected with HDMI.≥On :≥Off: When the TV is connected to this unit with an HDMIcable, and you are connected to an amplifier/receiverthat does not support HDMI.Control with HDMISet to use “HDAVI Control” function when connected with anHDMI cable to a device that supports “HDAVI Control”.≥On≥Off: Select when you do not want to use “HDAVI Control”.Others Off TimerSelect how long the unit remains on when it is not beingused.≥2 hours ≥6 hours ≥OffRemote Control (➡ 11) ≥Set Code 1 ≥Set Code 2 ≥Set Code 3Easy SettingYou can execute basic settings (“Language”§, “TV Aspect”,“Speaker” setting).≥Yes ≥NoDefault SettingsThis returns all values in the Setup menu and the On-screenmenu, except for “DVD-Video Ratings” and “Age limit for BD-Video viewing” to the default settings.≥Yes ≥NoSettings 11 Changing the unit’s settingsSettings