4VQT2H86AccessoryCheck the supplied accessories before using this unit.1 Remote control[BD65] [BD655] (N2QAKB000076)[BD45] (N2QAKB000078)1 Audio/Video cable(K2KA6BA00004)2 Batteries for remote control1 AC power supply cord[For[U.S.A.[and[Canada](K2CB2CB00022)[For[units[with[PX[printed[on[the[outer[packaging](K2CQ2CA00007)1 [For[units[with[PX[printed[on[the[outer[packaging]AC plug adaptor(K2DAYYY00002)1 [BD655] HDMI cable(K1HA19DA0005)(ONLY FOR CANADA)The enclosed Canadian French label sheet corresponds tothe English display on the front and back side of the unit.≥ Product numbers correct as of December 2009. These may be subject to change.≥ Do not use AC power supply cord with other equipment.≥ Only for U.S.A. and Puerto Rico: To order accessories, refer to “AccessoryPurchases (United States and Puerto Rico)” on page 39.For other areas: To order accessories, call the dealer from whom youhave made your purchase.Insert so the poles (i and j) match those in the remote control.Point it at remote control signal sensor on this unit. (> 5)Mishandling of batteries can cause electrolyte leakage which can damageitems the fluid contacts and may cause a fire.≥ Do not mix old and new batteries or different types at the same time.≥ Do not heat or expose to flame.≥ Do not leave the battery(ies) in an automobile exposed to direct sunlightfor a long period of time with doors and windows closed.≥ Do not take apart or short circuit.≥ Do not attempt to recharge alkaline or manganese batteries.≥ Do not use batteries if the covering has been peeled off.Remove batteries if the remote control is not going to be used for a longperiod of time. Store in a cool, dark placeCAUTIONDanger of explosion if battery is incorrectly replaced. Replace only withthe same or equivalent type recommended by the manufacturer.Dispose of used batteries according to the manufacturer’s instructions.Unit and media care∫ Clean this unit with a soft, dry cloth≥ Never use alcohol, paint thinner or benzine to clean thisunit.≥ Before using chemically treated cloth, carefully read theinstructions that came with the cloth.∫ Clean the lens with the lens cleanerdisc∫ Clean discsWipe with a damp cloth and then wipe dry.∫ Disc and card handling precautions≥ Handle discs by the edges to avoid inadvertent scratches orfingerprints on the disc.≥ Do not attach labels or stickers to discs.≥ Do not use record cleaning sprays, benzine, thinner, staticelectricity prevention liquids or any other solvent.≥ Clean any dust, water, or foreign matter from the terminalson the rear side of the card.≥ Do not use the following discs:– Discs with exposed adhesive from removed stickers orlabels (rented discs etc).– Discs that are badly warped or cracked.– Irregularly shaped discs, such as heart shapes.∫ To dispose or transfer this unitThe unit may keep the user settings information in the unit. Ifyou discard this unit either by disposal or transfer, then followthe procedure to return all the settings to the factory presets todelete the user settings. (>29, “To return all settings to thefactory preset.”)≥ The operation history may be recorded in the memory ofthis unit.Using the remote controlR6/LR6, AA(Alkaline or manganesebatteries)Lens cleaner disc: RP-CL720PP (not included)≥ This lens cleaner is sold as specific for DIGA, but can beused on this unit as well.DO DO NOT