Panasonic DMP-BD55 Installation Instructions Manual

Also see for DMP-BD55; DMP-BD35: Operating instructions Operating instructions Operating instructions

Contents

Panasonic DMP-BD55 Installation Instructions Manual Manual pdf 8 page image

5 Install FirmwareCAUTIONS: The firmware update may take up to 10 minutes to install. Please be patientduring the firmware installation. Do NOT press any other buttons during the firmware update.DMP-BD55 Blu-Ray Disc Player Firmware Installation InstructionsPage 8 of 8 Do NOT power the player OFF during the firmware update.1) Press the [POWER] button on the Blu-Ray Disc Player to turn it ON, if it is not alreadypowered ON.2) Press the [OPEN/CLOSE] button to open the disc tray.3) Load the CD with the firmware update into the disc tray.4) Press the [OPEN/CLOSE] button to close the disc tray.NOTES: After the disc tray closes, the player will first display BYE on the front paneldisplay, automatically turn itself OFF, restart again within a few seconds, andbegin installing the firmware update from the CD. If the player does not restart automatically following powering OFF, press the[POWER] button on the main unit to turn it ON. During the installation process you’ll see various messages flash on the frontpanel display. If the firmware version in the unit is the same as or higher than the firmwareCD, UNSUPPORT will scroll across the front panel display. In this case, anupdate is unnecessary. Please remove the disc.5) When the firmware installation is complete, FINISH will be displayed on the front paneland the disc tray will open automatically. (If it doesn’t, press the [OPEN/CLOSE]button.)6) Remove the firmware update CD, but do not close the disc tray.7) Press the [POWER] button to turn the power OFF. The disc tray will automaticallyclose and the unit will power OFF.

/ 8

Related manuals for Panasonic DMP-BD55; DMP-BD35