Panasonic DMP-BD75 Basic Operating Instructions Manual

Also see for DMP-BD75: Owner's manual Operating instructions

Contents

3VQT3A95EnglishSafety precautionsUnit≥ To reduce the risk of fire, electric shock or productdamage,– Do not expose this unit to rain, moisture, dripping orsplashing.– Do not place objects filled with liquids, such as vases,on this unit.– Use only the recommended accessories.– Do not remove covers.– Do not repair this unit by yourself. Refer servicing toqualified service personnel.– Do not let metal objects fall inside this unit.– Do not place heavy items on this unit.AC mains lead≥ To reduce the risk of fire, electric shock or productdamage,– Ensure that the power supply voltage corresponds to thevoltage printed on this unit.– Insert the mains plug fully into the socket outlet.– Do not pull, bend, or place heavy items on the lead.– Do not handle the plug with wet hands.– Hold onto the mains plug body when disconnecting theplug.– Do not use a damaged mains plug or socket outlet.≥ Install this unit so that the AC mains lead can beunplugged from the socket outlet immediately if anyproblem occurs.Unit≥ This unit utilizes a laser. Use of controls or adjustments orperformance of procedures other than those specifiedherein may result in hazardous radiation exposure.≥ Do not place sources of naked flames, such as lightedcandles, on this unit.≥ This unit may receive radio interference caused by mobiletelephones during use. If such interference occurs, pleaseincrease separation between this unit and the mobiletelephone.≥ This unit is intended for use in moderate climates.Placement≥ Place this unit on an even surface.≥ To reduce the risk of fire, electric shock or productdamage,– Do not install or place this unit in a bookcase, built-incabinet or in another confined space. Ensure this unit iswell ventilated.– Do not obstruct this unit’s ventilation openings withnewspapers, tablecloths, curtains, and similar items.– Do not expose this unit to direct sunlight, hightemperatures, high humidity, and excessive vibration.Batteries≥ Danger of explosion if battery is incorrectly replaced.Replace only with the type recommended by themanufacturer.≥ Mishandling of batteries can cause electrolyte leakageand may cause a fire.– Do not mix old and new batteries or different types at thesame time.– Do not heat or expose to flame.– Do not leave the battery(ies) in a car exposed to directsunlight for a long period of time with doors andwindows closed.– Do not take apart or short circuit.– Do not recharge alkaline or manganese batteries.– Do not use batteries if the covering has been peeled off.– Remove batteries if you do not intend to use the remotecontrol for a long period of time. Store in a cool, darkplace.≥ When disposing the batteries, please contact your localauthorities or dealer and ask for the correct method ofdisposal.AccessoriesCheck the supplied accessories before using this unit.≥ Product numbers provided in these operating instructions correct as ofJanuary 2011. These may be subject to change.≥ Do not use AC mains lead with other equipment.Insert so the poles (i and j) match those in the remotecontrol.Point it at remote control signal sensor on this unit.WARNINGCAUTION1 Remote control(N2QAYB000577)2 Batteries for remote control1 AC mains lead1 CD-ROMUsing the remote controlR6/LR6, AA(Alkaline ormanganese batteries)(3)