3VQT3B62EnglishSafety precautionsUnit≥ To reduce the risk of fire, electric shock or product damage,– Do not expose this unit to rain, moisture, dripping or splashing.– Do not place objects filled with liquids, such as vases, on this unit.– Use only the recommended accessories.– Do not remove covers.– Do not repair this unit by yourself. Refer servicing to qualifiedservice personnel.– Do not let metal objects fall inside this unit.– Do not place heavy items on this unit.AC mains lead≥ To reduce the risk of fire, electric shock or product damage,– Ensure that the power supply voltage corresponds to thevoltage printed on this unit.– Insert the mains plug fully into the socket outlet.– Do not pull, bend, or place heavy items on the lead.– Do not handle the plug with wet hands.– Hold onto the mains plug body when disconnecting the plug.– Do not use a damaged mains plug or socket outlet.≥ Install this unit so that the AC mains lead can be unplugged fromthe socket outlet immediately if any problem occurs.SD card≥ Keep the Memory Card out of reach of children to prevent swallowing.Unit≥ This unit utilizes a laser. Use of controls or adjustments orperformance of procedures other than those specified hereinmay result in hazardous radiation exposure.≥ Do not place sources of naked flames, such as lighted candles,on this unit.≥ This unit may receive radio interference caused by mobiletelephones during use. If such interference occurs, pleaseincrease separation between this unit and the mobile telephone.≥ This unit is intended for use in moderate climates.Placement≥ Place this unit on an even surface.≥ To reduce the risk of fire, electric shock or product damage,– Do not install or place this unit in a bookcase, built-in cabinet or inanother confined space. Ensure this unit is well ventilated.– Do not obstruct this unit’s ventilation openings withnewspapers, tablecloths, curtains, and similar items.– Do not expose this unit to direct sunlight, high temperatures,high humidity, and excessive vibration.Batteries≥ Danger of explosion if battery is incorrectly replaced. Replaceonly with the type recommended by the manufacturer.≥ Mishandling of batteries can cause electrolyte leakage and maycause a fire.– Do not mix old and new batteries or different types at the same time.– Do not heat or expose to flame.– Do not leave the battery(ies) in a car exposed to direct sunlightfor a long period of time with doors and windows closed.– Do not take apart or short circuit.– Do not recharge alkaline or manganese batteries.– Do not use batteries if the covering has been peeled off.– Remove batteries if you do not intend to use the remote controlfor a long period of time. Store in a cool, dark place.≥ When disposing the batteries, please contact your localauthorities or dealer and ask for the correct method of disposal.AccessoriesCheck the supplied accessories before using this unit.≥ Product numbers provided in these operating instructions correct as ofDecember 2010. These may be subject to change.≥ Do not use AC mains lead with other equipment.Insert so the poles (i and j) match those in the remotecontrol.Point it at remote control signal sensor on this unit.WARNINGCAUTION1 Remote control(N2QAYB000576)2 Batteries for remote control1 AC mains lead1 CD-ROMUsing the remote controlR6/LR6, AA(Alkaline ormanganese batteries)(3)