Panasonic DMP-BDT120 Operating Instructions Manual

Also see for DMP-BDT120: Operating instructions Operating instructions

Panasonic DMP-BDT120 Operating Instructions Manual Manual pdf 12 page image

12 VQT3V62≥ If your wireless network is encrypted,Encryption Key input screen will be displayed.Input the encryption key of your network.≥ Refer to the operating instructions of the hub or router.≥ You can perform this setup anytime by selecting “EasyNetwork Setting” in the Setup menu. (> 29)≥ You can redo these settings individually using “NetworkSettings”. (> 29)≥ Do not use this unit to connect to any wireless network forwhich you do not have usage rights.During automatic searches in a wireless networkenvironment, wireless networks (SSID) for which you donot have usage rights may be displayed; however, usingthese networks may be regarded as illegal access.≥ After performing network settings on this unit, the settings(encryption level, etc.) of the wireless router might change.When you have trouble getting online on your PC, performthe network settings on your PC in accordance with thesettings of the wireless router.≥ Please be aware that connecting to a network withoutencryption may result in the content of the communicationbeing illegitimately viewed by a third party, or the leaking ofdata such as personal or secret information.*1 An SSID (Service Set IDentification) is a name used bywireless LAN to identify a particular network. Transmissionis possible if the SSID matches for both devices.*2 The wireless router compatible with Wi-Fi ProtectedSetupTM may have the mark.Occasionally, Panasonic may release updatedfirmware for this unit that may add or improve theway a feature operates. These updates areavailable free of charge.This unit is capable of checking the firmwareautomatically when connected to the Internet viaa broadband connection.When a new firmware version is available, thefollowing message is displayed.To update the firmwareDO NOT DISCONNECT the unit from the ACpower or perform any operation while the updatetakes place.After the firmware is installed, “FINISH” will bedisplayed on the unit’s display. Unit will restartand the following screen will be displayed.≥ If downloading on this unit fails or this unit is notconnected to the Internet, then you can download thelatest firmware from the following website and burn itto a CD-R to update the firmware.http://panasonic.jp/support/global/cs/(This site is in English only.)To show the firmware version on this unit. (> 31,“Firmware Version Information”)≥ Downloading will require several minutes. It may takelonger or may not work properly depending on theconnection environment.≥ If you do not want to check for the latest firmware version,set “Automatic Update Check” to “Off”. (> 31)WPS (Wi-Fi Protected Setup TM) is a standard thatfacilitates settings relating to the connection andsecurity of wireless LAN devices.1 Press WPS button or corresponding button ofthe wireless router until the lamp startsflashing.≥ For details, refer to the operating instructionof the wireless router.2 Press [OK].Search for wireless network:≥ When you select “Search for wireless network”,the available wireless networks will bedisplayed. Select your network name and press[OK].– If your network name is not displayed, searchagain by pressing the red button on theremote control.– Stealth SSID will not be displayed when youselect “Search for wireless network”. Entermanually by using “Manual setting”.(Press [HOME] > select “Setup” > [OK] >select “Player Settings” > select “Network” >[OK] > select “Network Settings” > [OK] >select “Wireless Settings” > [OK] > select“Connection Setting” > [OK] > select“Manual setting” > [OK])Firmware updatesPress [HOME] > select “Setup” > [OK] >select “Player Settings” > select “System” >[OK] > select “Firmware Update” > [OK] >select “Update Now” > [OK]New firmware is available.Please update firmware in Setup.The firmware has been updated.Current Version: x.xx