Panasonic DMP-BDT300 Operating Instructions Manual

Also see for DMPBDT300 - 3D BLU-RAY DISC PLAYER: Operating instructions Specifications Operating instructions

Panasonic DMP-BDT300 Operating Instructions Manual Manual pdf 32 page image

32VQT2J893D TypeSelect the format of the connected TV.≥ Change the settings for 3D on the TV also when “Side byside” is selected.TV AspectSet to match the type of television connected.HDMI ConnectionPress [OK] to show the following settings.Analog Audio OutputYou can set the optimum multi-channel surround soundfor your speakers from this unit when the settings cannot beadjusted from a connected amplifier/receiver with AUDIOOUT terminals.Select “2ch (Downmix) + 5.1ch” or “7.1ch” and press [OK],and then set the following options.– Speaker presence and size ( )– Delay time ( )– Channel balance ( )To finish the speaker settingPress [3, 4, 2, 1] to select “Complete” and press [OK].TV SystemPerform the setup so it matches the TV System of theconnected TV.≥ When NTSC contents are played, they are outputted in thesignal format specified in the “NTSC Contents Output”,irrespective of the settings here.TV / Device ConnectionWhen connected to a 4:3 aspect television and playing 16:9ratio image:4:3 Pan &ScanThe sides are cut off sothe picture fills the screen.When playing BD-Video,video is output as “4:3Letterbox”.4:3LetterboxBlack bands appear at thetop and bottom of thepicture.When connected to a 16:9 widescreen television andplaying 4:3 ratio image:16:9 Video is displayed as a 4:3 ratio image in thecentre of the screen.16:9 full Video is displayed as a horizontallystretched 16:9 image.HDMI Video ModeSelect “On” when video is output from HDMI AV OUTterminal.On Images are output from the HDMI terminal in theresolution set in “ HDMI Video Format”.Off Images are output in the resolution set in“Component Resolution”.HDMI(SUB) Output ModeSet to output the video from the HDMI SUB AV OUTterminal or not.HDMI Video FormatThe items supported by the connected devices areindicated on the screen as “¢”. When any item without “¢”is selected, the images may be distorted.≥ If “Automatic” is selected, automatically selects the outputresolution best suited to the connected television.≥ To enjoy high-definition video up-converted to 1080p, youneed to connect the unit directly to 1080p compatibleHDTV (High Definition Television). If this unit is connectedto an HDTV through other equipment, the other must alsobe 1080p compatible.24p OutputWhen this unit is connected to a TV supporting 1080/24poutput using an HDMI cable, movies and other materialrecorded at 24p are output at 24p.≥ When playing DVD-Video, set to “On” and then set “24p”in “Picture” (> 29) to “On”≥ When BD-Video images other than 24p are played,images are output at 60p.HDMI Colour ModeThis setting is for selecting colour-space conversion of theimage signal when the unit is connected using an HDMIcable.HDMI Audio OutputThis setting selects whether or not to output audio fromHDMI.≥ Select “Off” when the TV is connected to this unit via anHDMI terminal, and this unit is also connected to otherdevices, such as an amplifier/receiver via a COAXIAL oran OPTICAL terminal.VIERA LinkSet to use “HDAVI Control” function when connected withan HDMI cable to a device that supports “HDAVI Control”.≥ Select “Off” when you do not want to use “HDAVI Control”.Deep Colour OutputThis setting is for selecting whether to use Deep ColourOutput when a television that supports Deep Colour isconnected.Contents Type FlagDepending on the playback content, the TV will outputadjusting to the optimal method when a TV that supportsthis function is connected.Component ResolutionThis sets the video output resolution when using thecomponent video terminal.480i, 480p: When playing NTSC discs576i, 576p: When playing PAL discs≥ Even if you select “720p” or “1080i”, the video outputresolution is restricted to “576p/480p” when DVD-Videodiscs, DivX and BD-Video discs recorded at a rate of 50field per second are output from the COMPONENT VIDEOOUT terminals.L LSR SW RS LB RBCms0.0dB0.0