Panasonic DMP-BDT310 Operating Instructions Manual

Also see for DMP-BDT110: Owner's manual Owner's manual Operating instructions Owner's manual Operating instructions

Panasonic DMP-BDT310 Operating Instructions Manual Manual pdf 39 page image

Reference39VQT3B75SpecificationsSignal system: PAL/NTSCOperating temperature range:i5 oC to i35 oCOperating humidity range:10 % to 80 % RH (no condensation)Video output: 1.0 Vp-p (75 ≠)/Pin jack:1 systemAudio output: 2 Vrms (1 kHz, 0 dB)/Pin jackNumber of connectors : 2 channel:1 systemDigital audio output:Optical digital output (Optical terminal)HDMI AV output: Type A (19 pin) [BDT310] : 2 system[BDT210] [BDT110] : 1 systemThis unit supports “HDAVI Control 5” function.SD card slot: Connector : 1 systemUSB slot: USB2.0 : 2 systemEthernet: 10BASE-T/100BASE-TX : 1 systemWLAN [BDT310] [BDT210]Antenna: Tx 1, Rx 2Standard Compliance:IEEE802.11n / IEEE802.11a / IEEE802.11g /IEEE802.11bTransmission system:MISO-OFDM system, OFDM system, DSSSsystemFrequency range:IEEE802.11n / IEEE802.11a :5.15 GHz to 5.35 GHz5.47 GHz to 5.725 GHzIEEE802.11g / IEEE802.11b / IEEE802.11n :2.4 GHz to 2.4835 GHzTransfer rate (standard)*:IEEE802.11n: Tx Max. 150 Mbps,Rx Max. 300 MbpsIEEE802.11g / IEEE802.11a: Max. 54 MbpsIEEE802.11b: Max. 11 MbpsAccess Mode: Infrastructure modeSecurity: WPA2-PSK (TKIP/AES)WPA-PSK (TKIP/AES)WEP (64 bit / 128 bit)(This unit supports WPA and WPA2 encryption.)LASER SpecificationClass 1 LASER Product:Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)Laser power:No hazardous radiation is emitted with thesafety protectionPower supply: AC 220 to 240 V, 50 HzPower consumption: [BDT310] : Approx. 13 W[BDT210] [BDT110] : Approx. 11 WPower consumption in standby mode: Approx. 0.2 WPower consumption in quick start standby mode:[BDT310] : Approx. 4.3 W[BDT210] [BDT110] : Approx. 3.3 WDimensions (WkDkH) Including the projecting parts:430 mmk185 mmk35 mmMass: Approx. 1.6 kgSpecifications are subject to change without notice.* Transfer rates are theoretical values; however, actualcommunication rate will vary according to communicationenvironment or connected equipment.≥ With certain recording states and folder structures, theplay order may differ or playback may not be possible.The audio output differs depending on which terminals areconnected to the amplifier/receiver, and the settings on theunit. (> 31, Digital Audio Output)≥ The number of channels listed is the maximum possiblenumber of output channels when connected to amplifier/receiver compatible with the respective audio format.*1 When “BD-Video Secondary Audio” is set to “On”, the audio will beoutput as Dolby Digital, DTS Digital Surround or 5.1ch PCM.*2 [BDT110] : The maximum possible number of Dolby sound is 5.1ch PCM.*3 The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending onthe DTS, Inc. specifications.File formatFile format Extension ReferenceMP3 “.MP3”, “.mp3“ ID3 tags (Only titles andthe names of artists)JPEG “.JPG”, “.jpg“≥ MOTION JPEG andProgressive JPEG is notsupported.≥ You may not be able toplay back the file if youhave edited the folderstructure or the filename on a PC or otherdevice.DivX“.DIVX”, “.divx”,“.AVI”, “.avi”≥ The video file andsubtitles text file areinside the same folder,and the file names arethe same except for thefile extensions.≥ Some DivX and MKVfile may not be playedback, depending on thevideo resolution andframe rate condition.Subtitles textfile“.SRT”, “.srt”,“.SUB”, “.sub”,“.TXT”, “.txt”MKV“.MKV”, “.mkv”Subtitles textfile“.SRT”, “.srt”,“.SSA”, “.ssa”,“.ASS”, “.ass”Audio informationTerminal “Digital Audio Output”“Bitstream” “PCM”HDMI AVOUTOutputs using originalaudio*1BD-Video :7.1ch PCM *1*2*3DVD-Video :5.1ch PCMOPTICAL Dolby Digital/DTS Digital SurroundDown-mixed 2chPCM