Panasonic DMP-BDT310 Owner's Manual

Also see for DMP-BDT110: Owner's manual Operating instructions Operating instructions Owner's manual Operating instructions

Panasonic DMP-BDT310 Owner's Manual Manual pdf 12 page image

12 VQT3B58STEP 4 : Connecting toan AC power source≥ This unit consumes a small amount of AC power (> 39)even when turned off. In the interest of powerconservation, if you will not be using this unit for anextended period of time, it can be disconnected.STEP 5 : SettingsAfter connecting your new player for the 1st time andpressing the power button, a screen for the basic settingswill appear.PreparationTurn on the television and select the appropriate videoinput on the television.1 Press [Í POWER].Setup screen appears.If this unit is connected to a Panasonic TV (VIERA)supporting HDAVI Control 2 or later via an HDMI cable,then setting information on the TV such as “On-screenLanguage” is acquired by this unit.2 Follow the on-screen instructions andmake the settings with [3, 4] and press[OK].After completing “Easy Setting”, you can perform “NetworkEasy Setting”.≥ You can perform this setup anytime by selecting “Easy Setting” in theSetup menu. (> 33)Touch Free Sensor [BDT310] [BDT215] [BDT210]By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or closethe tray just by waving your hand over the TOUCH-FREE SENSOR on theupper side of the unit. (This will also work when in stand-by.)≥ Be aware that the TOUCH-FREE SENSOR may function unintentionallyin the following cases:– When your hand or arm, an object, a small child, or a small animalcomes close to the upper part of the unit– When an object is placed on top of the unit and vibration is applied– When connecting a cable etc. to the rear of the unit≥ Reactive distance of the sensor is automatically set in accordance withthe installation conditions at the time of power supply connection andwhen the open/close button is pressed. To prevent an incorrect setting,do not place your hands or objects above the unit at these times.≥ Depending on the usage conditions, the TOUCH-FREE SENSOR maystop working or the reactive distance may become shorter. In suchcases, press the tray open/close button once.[For_units_with_PX_printed_on_the_outer_packaging]If the power plug does not fityour AC outlet, use the powerplug adaptor (supplied).If it still doesn’t fit, contact anelectrical parts distributor for assistance.Install this unit so that the power cord can be unplugged from thesocket outlet immediately if any problem occurs.COMMUNICATIONCAMERA AUDIORAC power supply cord(supplied)To a household AC outletEasy Setting