Panasonic DMP-BDT320 Operating Instructions Manual

Also see for DMP-BDT320: Owner's manual Operating instructions Basic operating instructions

Settings33VQT3V73Registration TypeRemote Device ListRegistering/deregistering of the displayedequipment can be performed when “Manual”in “Registration Type” is selected.¾BD-Live Internet Access (> 21)You can restrict Internet access when BD-Livefunctions are used.≥ If “Limit” is selected, Internet access ispermitted only for BD-Live contents whichhave content owner certificates.The following items use the same password.Don’t forget your password.∫ DVD-Video RatingsSet a ratings level to limit DVD-Video play.∫ BD-Video RatingsSet an age limit of BD-Video play.∫ Network Service LockYou can restrict the usage of VIERA Connect.∫ Easy SettingYou can execute basic settings.∫ TV Settings¾TV AspectSet to match the type of television connected.When connected to a 4:3 aspect television andplaying 16:9 ratio image:When connected to a 16:9 widescreentelevision and playing 4:3 ratio image:¾Screen Saver FunctionThis is to prevent burn-in on the screen.≥ When this is set to “On”:If a list of playback content is displayed andthere is no operation for 10 minutes or more,the screen switches to HOME menuautomatically.≥ While playing and pausing, etc., this functionis not available.¾On-Screen MessagesChoose whether to show status messagesautomatically.AutomaticAllow connection to all theequipment that isaccessing this unit.ManualSet the permission of theconnection individually forthe equipment that isaccessing this unit.RatingsSystemTap to show the following settings:4:3 Pan & ScanThe sides arecut off so thepicture fillsthe screen.When playing BD-Video,video is output as “4:3Letterbox”.4:3 LetterboxBlack bandsappear atthe top andbottom ofthe picture.16:9Video is displayed as a 4:3ratio image in the centre ofthe screen.16:9 fullVideo is displayed as ahorizontally stretched 16:9image.¾TV SystemPerform the setup so it matches the TV Systemof the connected TV.≥ When NTSC contents are played, they areoutputted in the signal format specified in the“NTSC Contents Output”, irrespective of thesettings here. (> 29)