4 VQT3V22AccessoriesCheck the supplied accessories before using thisunit.1 Remote control(N2QAYB000710)2 Batteries for remote control1 AC power supply cord(K2CB2CB00022)≥ Product numbers provided in this Owner’s Manual correctas of December 2011. These may be subject to change.≥ Do not use AC power supply cord with other equipment.∫ Using the remote controlInsert so the poles (i and j) match those in theremote control.Point it at the remote control signal sensor on thisunit. (> 7)Unit and media care∫ Clean this unit with a soft, drycloth≥ Never use alcohol, paint thinner or benzine toclean this unit.≥ Before using chemically treated cloth, carefullyread the instructions that came with the cloth.∫ This unit’s lensThe disc drive of this unit has sufficient dustresistance, so there is no need to clean the lens.∫ Clean discsWipe with a damp cloth and then wipe dry.∫ Disc and card handlingprecautions≥ Handle discs by the edges to avoid inadvertentscratches or fingerprints on the disc.≥ Do not attach labels or stickers to discs.≥ Do not use disc cleaning sprays, benzine,thinner, static electricity prevention liquids orany other solvent.≥ Clean any dust, water, or foreign matter fromthe terminals on the rear side of the card.≥ Do not use the following discs:– Discs with exposed adhesive from removedstickers or labels (rented discs, etc).– Discs that are badly warped or cracked.– Irregularly shaped discs, such as heartshapes.∫ To dispose or transfer this unitThe unit may keep the user settings information inthe unit. If you discard this unit either by disposalor transfer, then follow the procedure to return allthe settings to the factory presets to delete theuser settings. (> 33, “To return all settings to thefactory preset.”)≥ The operation history may be recorded in thememory of this unit.[For_Canada]The enclosed Canadian French label sheet correspondsto the English display on the unit.LR6, AA(Alkaline batteries)DO DO NOT