Panasonic DMP-MST60 Operating Instructions Manual

Also see for DMP-MS10: Quick start guide Owner's manual Owner's manual Operating instructions

Contents

Panasonic DMP-MST60 Operating Instructions Manual Manual pdf 28 page image

- 28 -ReferenceReferenceLED indicatorsError states are indicated by the INFO LED.Confirm the following items in correspondence tothe state of INFO LED of this unit.≥ If the state of the INFO LED does not changeafter performing the operations in the tablebelow, contact your local Panasonic dealer.A INFO LEDMessagesCheck the following when message are displayedon the screen.Cannot play.¾ An attempt was made to play backincompatible content.Cannot play on this unit.¾ You tried to play a non-compatible image.$ This operation is not available.¾ Some operations are unsupported by the unit.IP address is not set.¾ The “IP Address” in “IP Address / DNSSettings” is “---. ---. ---. ---”. Set the “IPAddress”, “Subnet Mask”, and “GatewayAddress”. (Select the automatic addressacquisition if necessary.)The wireless access point currently has a lownetwork security setting. It is recommended tochange to a higher setting.¾ Set a stronger network security level referringto the wireless router operating instructions.INFO LEDstate DescriptionFlashes6 timesThe remote control and this unitare using different codes.Turn on this unit by using thestandby/on switch on this unit,and check “Remote control ”,which is displayed on the screenwhen you press a button on theremote control.Press and hold [OK] and thedisplayed number (“”) for morethan 5 seconds.Lights upThe USB device is drawing toomuch power. Please disconnector remove the USB device fromthe unit.The USB device may beincompatible.POWER INFO