Panasonic DMP-MST60 Owner's Manual

Also see for DMP-MS10: Quick start guide Owner's manual Operating instructions Operating instructions

Panasonic DMP-MST60 Owner's Manual Manual pdf 18 page image

- 18 -PlaybackPlaying back USBdevices1 Insert the USB device.≥ When inserting a media item, ensure that itis facing the right way.≥ If you connect a Panasonic product with aUSB connection cable, the setup screenmay be displayed on the connectedequipment. For details, refer to theinstructions for the connected equipment.2 Select the item to play and press [OK].Repeat this procedure if necessary.≥ USB devices of up to 2 TB can be used.≥ This unit does not guarantee connection with allUSB devices.≥ This unit does not support USB device charging.≥ FAT12, FAT16, FAT32, and NTFS file systemsare supported.≥ This unit supports USB2.0 High Speed.≥ This unit supports an HDD formatted in FAT32and NTFS. If the HDD is not recognized, thepower to the HDD may not be supplied. Supplypower from an external source.Play a slideshow of photos and adjust varioussettings during the playback.Select an item and press the green button.The following items can be set.≥ It may not be possible to play the contents in some casesdue to the type of media, the condition of the recording, therecording method, and how the files were created.≥ MKV: Successive play is not possible.≥ It is not possible to play back MPEG2 videos which havebeen dragged and dropped or copied and pasted to theUSB device.≥ To save on electricity, this unit is turned off automatically ifthere is no button operation for about 30 minutes when notplaying back (such as when paused, displaying the menu,displaying still pictures, etc.). (Compatible with ENERGYSTAR)≥ Still pictures displayed as “ ” cannot be played backwith this unit.USB deviceContents formatMKV, MP4, MPEG2, JPEG,AAC, FLAC, MP3, WAV,WMA, [MST60] MPOSlideshowStartSlideshowStart the slideshow.You can display still pictures inthe selected folder one by one ata constant interval.DisplayInterval Change the display interval.TransitionEffectSelect the effect when slidingpictures.Repeat Play Set whether to repeat theslideshow.