RecordingRecording TV programmes• This operation will only record to built-in HDD.• This unit can record two programmes beingbroadcasted at the same time.• About CI Plus restriction (o 15)• Notes for recording of an encrypted broadcast(O 34)1 Select the channel to record.2 Press [REC MODE] and select theconversion mode, then press [OK].• This unit will record the programmes in DRmode once, and then automaticallyconvert to the selected recording modewhile this unit is in standby.• Recording mode (O 8)• The conversion mode set here is usedas an initial value for the next recording.3 Press [REC •].Recording starts.• “REC1 ” or “REC2” will light on the unit'sdisplay.4 Select “Automatic Stop”, then press[OK].• One touch recording (OTR)Recording stops automatically when theprogramme ends.REC1/OTR8:00 - 8:45VacationAutomatic Stop at 8:45Recording Time | 30 minContinuous recording• You can also select “Recording Time” or“Continuous recording”. (O below)To set the recording time1 Select “Recording Time” or “Continuousrecording” in step 4 (O above).Recording Time:You can set the length of recording time from30 minutes to 4 hours.• You can select the recording time with [2,►].Continuous recording:The recording is continued until you press[STOP ■].2 Press [OK].Conversion Mode Setting HDDRemain Oh Om (DR) Data SizeHGHXHLHM SmallLargeOff (DR)HEXPSP5malRETURN32 VQT4W71
