RecordingSQT0807 35Timer recording• Some broadcasters may not send programme information.When programme information is not displayed correctly,use manual timer recording. (> 37)• The receipt of the TV Guide data via Set Top Box is notpossible.• When timer recording from the external equipment, usemanual timer recording. (> 37)• You can set the start and finish time to make the timerrecording work successfully. (> 89, Timer Record StartBuffer, Timer Record Stop Buffer)Refer to “Using TV Guide system”. (> 29)1 Select the programme to edit, then press thered button.2 Select “Timer Rec Edit”, then press [OK].3 Go to step 3 on page 37, “Manuallyprogramming timer recording”.1 Select the programme to cancel, then pressthe red button.2 Select “Timer Rec Cancel”, then press [OK].(“F” disappears)Refer to “Operation during Recording”. (> 32)• You can enter up to 32 programmes within amonth in advance. (Each daily or weeklyprogramme is counted as one programme.)• This unit can record two programmes beingbroadcasted at the same time.§• About CI Plus restriction (> 15)• Notes for recording of an encrypted broadcast(> 33)PreparationIf you want to change the recording mode:Press [REC MODE] and select the recordingmode, then press [OK].1 Press [GUIDE].TV Guide screen appears.2 Select the programme, then press thered button.The timer icon “F” (red) is displayed.• If on-screen instructions are displayed,follow them.§ [BST855] [BST850] [BST755] [BST750]The number of programmes that can besimultaneously recorded varies depending onthe setup environment. (> 17)To use TV Guide systemTo edit the timer recording on the TV GuidescreenTo cancel a timer recording on the TV GuidescreenOperation during Recording