16RQT9131STEP 1 Connection≥Before connection, turn off all equipment and read the appropriate operating instructions.≥Refer to “Additional connections” (➡ 94) for connection using other terminals and connection with other equipment.When the unit is not to be used for a long timeTo save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off[approx. 3 W (Power Save mode)]When “Power Save” is set to “On”, the “Quick Start” function does not work.Connecting a televisionConnecting to a television with 21-pin Scart terminalYou can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGBoutput on this unit.[Required]setting]“AV1 Output” in the Setup menu (➡ 88)RFRFININRFRFOUTOUTAV2 (EXT )AV1(TV)OPTICALCOAXIALCOMPONENTCOMPONENTVIDEO OUTVIDEO OUTOUTOUTAV4 INAV4 INS VIDEOVIDEOR-AUDIO-LP R P B YAC IN 10BASE-T/100BASE-TXDIGITALDIGITAL AUDIO OUTAUDIO OUT(PCM/BITSTREAM)(PCM/BITSTREAM)VHF/UHFRF IN24 3AUDIO INR L VIDEO IN12This unit’s rear panelRed White YellowRed White YellowAudio/Video cable(included)Other connections(➡ 17, 94)RF coaxialcable(included)To the aerialAerial cableTelevision’s rear panelTo household mains socket(AC 220 to 240 V, 50 Hz)AC mains lead(included)Connect only after all otherconnections are complete.Cooling fan
