Panasonic DMR-BWT740 Operating Instructions Manual

Also see for DMR-BWT740: Operating instructions

Contents

Panasonic DMR-BWT740 Operating Instructions Manual Manual pdf 92 page image

TroubleshootingSQT013792Troubleshooting guideTroubleshootingBefore requesting service, make the followingchecks. If the problem still persists, consultyour dealer for instructions.Updating to the latest software (firmware) maysolve the problem. (> 87)The unit does not work.• Check the connections. (> 14)• One of the unit’s safety devices may have beenactivated.Reset the unit as follows:1 Press [Í/I] on the main unit to switch the unitto standby.• If the unit does not switch to standby, press[Í/I] on the main unit for about 3 seconds.The unit is forcibly switched to standby.Alternatively, disconnect the AC mainslead, wait one minute, then reconnect it.2 Press [Í/I] on the main unit to switch it on. Ifthe unit still cannot be operated, consult thedealer.Cannot eject a disc.1 While the unit is in standby mode, press andhold [OK], the yellow button and the bluebutton at the same time for more than5 seconds.• “00 RET” is displayed on the unit’s display.2 Repeatedly press [1] (right) until “06 FTO” isdisplayed on the unit’s display.3 Press [OK].The unit is switched to standby modeautomatically.• VIERA Link has worked. (> 69, Power off link)The followings do not indicate a problemwith this unit:• Regular disc rotating sounds or HDD rotatingsounds.• Poor reception due to atmospheric conditions.• Image disturbance during search.• Image disturbance when replacing 3D discs.• Interruptions in reception due to periodicbroadcasting breaks.• When you switch the unit on or to standbymode, there may be an unexpected sound.General operation