Panasonic DMR-E50K Operating Instructions Manual

Also see for Diga DMR-E50: Operating instructions Operating instructions Operating instructions

Contents

45RQT6920Advanced operationChanging the remote control codePanasonic DVD players and recorders use the same remote controlsystem so they may respond unintentionally to a command from thisremote control. Change the code on this unit and its remote control(the two must match) if you place equipment close together.≥Use “1”, the factory set code, under normal circumstances.1 While stoppedPress [SETUP] to show the menus.2 Press [3, 4] to select “Set Up” andpress [1].3 Press [3, 4] to select “Remote Con-trol Code” and press [ENTER].4 Press [3, 4] to select the code (1, 2,or 3) and press [ENTER].The remote control code on the unit has been set.5 While pressing [ENTER] on theremote control, press the numberedbutton ([1], [2] or [3]) correspondingto the code you selected in step 4.The remote control code on the remote control has been set.6 Press [SETUP]The following display appears when you use a remote control with adifferent code.If you are trying to use this unit’s remote control, change its code tomatch the unit’s (➜ step 5).OPEN/CLOSESETUPERASE F Rec POSITION MEMORY MARKERAUDIO INPUT SELECTCM SKIPSTATUS FRAMEDISPLAYSTOPPAUSEPLAY/a1.3DVDVCR Plus+ TV/VIDEO REC MODE RECCHVOLUMETVTVDVD1 2 37 8 90 1004 5 6SLOW/SEARCHSKIPDIRECT NAVIGATORTOPMENUMENURETURNFUNCTIONSPROG/CHECK TIME SLIPADD/DLTENTERPLAY LISTCANCELPOWERÍ ÍSETUP3, 4, 2, 1ENTERNumberedbuttonsTAB SELECTAntenna SystemAuto Channel SettingChannel CaptionPreset Channel CaptionManual Channel CaptionVCR Plusi CH SettingCATVChannelSETUPRETURNSet UpDiscVideoAudioDisplayTV ScreenThe unit’s remote control code