Panasonic DMR-E55PL Servise Manual

Panasonic DMR-E55PL Servise Manual Manual pdf 17 page image

10.2. Special Modes SettingItem FL display Key operationMode name Description Front KeyTEST Mode *All the main unit´s parameters (include tuner)are initialized.Press [SKIP (REV)], [TIME SLIP]and [OPEN/CLOSE] keyssimultaneously for five secondswhen power is off.Service Mode Setting every kind of modes for servicing.*Details are described in “10.3. ServiceMode ”.When the power is off, press[STOP], [TIME SLIP] and[OPEN/CLOSE] keyssimultaneously for 5 seconds.Rating password The audiovisual level setting password isinitialized to “Level 8”.Open the tray, and press [SKIP(REV)] and [SKIP (FWD)]simultaneously for five seconds.Forced disc eject Removing a disc that cannot be ejected.The tray will open and unit will shift to P-offmode.*When Timer REC is ON or EXT-LINK is ON,execute " Forced disc eject " after releasingTimerREC or EXT-LINK.*This command is not effective during "Childlock" is ON.The display before executionleaves.When the power is off, press[STOP] and [CH UP] keyssimultaneously for five seconds.Forced power-off When the power button is not effective whilepower is ON, turn off the powerforcibly.*When Timer REC is ON or EXT-LINK is ON, execute “Forced Power-off” afterreleasing Timer RECor EXT-LINK.Action:The tray will open, and the power will turn off.Display in P-off mode. Press [Power] key over than 10seconds.Aging Perform sequence of modes as * AgingDescription shown below continually.Display following the then mode. When the power is ON, press [CHDOWN], TIME SLIP] and [OPEN /CLOSE] simultaneously for over fiveseconds and less than 10 seconds.*The [REC MODE] should be set toEP or LP.*Whenthe unit has hung-upbecause of pressing keys for over10 seconds, once turn off thepower, and re-execute thiscommand.“When releasing Aging mode, press[POWER] key.Demonstrationlock/unlockEjection of the disc is prohibited.The lock setting is effective until unlocking thetray and not released by “Main unitinitialization” of service mode.*When lock the tray.“LOCK” is displayed for 3 seconds.When the power is on, press[STOP] and [POWER] keyssimultaneously for five seconds.*When unlock the tray.“UNLOCK” is displayed for 3seconds.When the power is on, press[STOP] and [POWER] keyssimultaneously for five seconds.*When press OPEN/CLOSE keywhile the tray being locked.Display “LOCK” for 3 seconds.Press [OPEN/CLOSE] key while thetray being locked.ATP Initialization ATP setting is initialized, and the unit turns offautomatically.It is same with display in stop mode. When the power is on (E-E mode),press [CH UP] and [CH DOWN]simultaneously for five seconds.Progressive initialization The progressive setting is initialized toInterlace.The display before executionleaves.When the power is on (E-E mode),press [STOP] and [TIME SLIP]simultaneously for five seconds.17DMR-E55PL