21RQT7301 Recording≥Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].Press [PROG/CHECK].∫ To change a programPress [3, 4] to select the program and press [ENTER].(➡ page 20, step 3)∫ To delete a programPress [3, 4] to select the program and press [¢ CANCEL] or[ADD/DLT].∫ To exit the timer recording listPress [PROG/CHECK].The message “TURN RECORDER OFF FOR TIMERRECORDING.” is shown on the television.∫ To put the unit on timer recording standbyPress [Í DVD POWER].The unit turns off and “F” lights on the unit’s display to indicate timerrecording standby has been activated.≥Programs that failed to record are displayed gray. They are automatically deleted from the timer recording list at 4 a.m. two days later.≥During timer recording, you can change the end time as long as the recording mode is not “FR”.Check, change or delete a programTIMERRECORDING Remaining Recording TimeMODE CHECKOFFONNo CHANNEL DATE1:57 LP3/26 TUE 1:19 PMPress ENTER or VCR Plus+ tostore new program.New Timer ProgramIcons[ This program is currently recording.W The times overlap those in another program. Recording ofthe program with the later start time starts when theearlier program finishes recording.- You stopped a weekly or daily timer recording. The icondisappears the next time the timer starts recording.F The disc was full so the program failed to record.The material was copy-protected so it was not recorded.X The program did not complete recording because the discis dirty or some other reason.Message displayed in the CHECK lineOK: Displayed if the recording can fit in theremaining space.> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made(up to a maximum of one month from thepresent time) based on the time remaining onthe disc.! : It may not be possible to record because:≥the disc is write-protected≥there is no more space left≥the number of possible titles has reached itsmaximum.