Panasonic DMR-E75VP Service Manual

Also see for DMRE75VP: Operating instructions Service manual

Contents

ServiceNumberContents Contents of Indication on minute Contents of Indication on second Remarks6 Indication for theinner data ofIC6001Real time servo data (4 digits)(Real time)Higher rank 1 BYTE of SERVO data Lower rank 1 BYTE of SERVO data7 Manual mechanismoperationReal time mechanism position Real time ordering for the Motors Press the STOP key, and then thecassette tape is unloaded.0L: EJECT position02: DOWN position03: RREW position04: LOAD position05: REV position06: PLAY position07: POFF position08: STOP_R position09: STOP_F position- : FF/REW position- : Intermediate betweeneach positions0*, 2*: CYL off,CAP off1*: CYL off,CAP on (fwd)8*, A*: CYL on,CAP off9*: CYL on,CAP on (fwd)B*: CYL on,CAP on (rev)*0: Motor off*1: Loading*2: Unloading*3: Break (Load + Unload)12.3.2. Example of FIP12.4. (VHS) Self-Diagnosis History Memory Function12.4.1. (VHS) Condition for memorizing of the self-diagnosis history1. The self-diagnosis result and the supplementary data are the condition memorized just as an Error is detected.2. There are the histories from number 1 to number 3.3. The latest Error is memorized on history number 1,and then the old histories are shifted to the history number 2, 3.4. Put out data from the memory number 3 by the shift is deleted.5. If the latest Error is same with the history number 1 (2nd-latest), it is not memorized.(The same Error number is not memorized in succession)12.4.2. (VHS) Condition for clearing the self-diagnosis history1. A case of that press the FF key and the EJECT key simultaneously over 5 seconds.2. A case of that the factory jumper (TW1004) is shorted.12.4.3. (VHS) Indication of the self-diagnosis history.1. The self-diagnosis histories and its supplementary data could be indicated on the FIP with Service mode of2. The procedure of setting the service mode and the format if the indication are same as usual.Both the Error numbers and its supplementary data of history 1, 2and 3 are indicated by selecting the Service mode 3, 4 and 5 asshown above.In case of that any Error has not been memorized, the Error number and its supplementary data is indicated as " - ".31DMR-E75VP