2 3RFINRFOUTAC INAV IN RF INDVD/VHS COMMON OUTDVD PRIORITY OUTRFIN RFOUTAV INRFOUTRF INDVD/VHS COMMON OUTDVD PRIORITY OUT124 3RFINRFOUTAV IN RF INDVD/VHS COMMON OUTDVD PRIORITY OUTRFOUT SatelliteINRFININ1AV OUTG-LINKAC INRF INRFIN RFOUTAV INRFOUTDVD/VHS COMMON OUTDVD PRIORITY OUTIN32 1536748Step 1ConnectionDVD Connection Guides (This is in English only) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp• Other connections (when you also want to connect an amplifi er, etc.).Operating Instructions (P16–22).With a TV With a TV and cable box or DirecTV receiverCable box or DirecTV receiverTV TVYou must makethis connection.You must makethis connection.Satelliteantenna(Satellitereceiver only)Cable from wall/antenna signal(Included)Cable from wall/antenna signal(Included)(Included)This unit This unit(Included)(Included) (Included)DVD output and DVD/VHS outputThe unit has DVD/VHS COMMON outputterminals and DVD PRIORITY output terminals.DVD/VHS COMMON OUTFor DVD/VHS COMMON output terminals, bothDVD and VHS signals can be output.DVD PRIORITY OUTYou can also playback a tape with the DVDPRIORITY output terminal except while recording,or making a scheduled recording, on the DVD.DVD/VHS COMMON OUTDVD PRIORITY OUTR-AUDIO-L VIDEO S VIDEOY P B P ROPTICALCOMPONENT VIDEO OUTDIGITAL AUDIO OUT(PCM/BITSTREAM)R-AUDIO-L VIDEODVD/VHS COMMON outputDVD PRIORITY outputGo to Step 2Connecting and positioningthe IR BlasterThe IR Blaster is a device that allows this unitto communicate with the cable box or DirecTVreceiver. If you connect a cable box or a DirecTVreceiver to this unit, you also need to attach theIR Blaster.Cable box orDirecTV receiverIR Blaster(in front of, and asnear as possible to,the signal sensor)(the signal sensor)This unitGo to Step 2 If your TV does not have AV terminals(Instead of and )TVRFmodulatorThis unit(Included)IR Blaster(Included) If your TV does not have AV terminals(Included) (Instead of and )TVRFmodulatorThis unit(Included)(Included)Cable box orDirecTV receiver