Panasonic DMR-ES30VP Service Manual

Also see for DMRES30VP: Operating instructions

Contents

Item FL display Key operationMode name Description (Remote controller key)S1 signal output Forcibly superimpose the S1 signal (approx.4.5V DC) on the EE chroma signal, and checkthe output on the S terminal.Press [5] [2] in service mode.S2 signal output Forcibly superimpose the S2 signal (approx.2V DC) on the EE chroma signal, and checkthe output on the S terminal.Press [5] [3] in service mode.Front connectioninspectionPress all front keys and check the connectionbetween Main P.C.B. and Front P.C.B.(1) Each time a key is pressed,segment turned on increases oneby one.(2) Total umber of keys that havebeen pressed.Press [5] [4] in service mode.Production Date Display Display the date when the unit was produced.YYY: YearMM: MonthDD: DayPress [6] [1] in service mode.Display the accumulatedworking timeDisplay the accumulated unit’s working time.(Indicating unit: Second)Press [6] [4] in service mode.Display the Error History Display the Error History stored on the unit. Display reason of error for 5seconds.Display the time when the error hasoccurred for 5 seconds..Y: YearMM: MonthDD: DayHH: HourMM: MinuteAccumlated working time tooccurring of the error is leftdisplayed.(Indicating unit: Second)Press [6] [5] in service mode.Then press [0] [1] ~ [1] [9], the past19 error histories are displayed.Delete the Error History Delete Error History information stored on theunit.Press [9] [7] in service mode.Tray OPEN/CLOSE Test The RAM drive tray is opened and closedrepeatedly.“*” is number of open/close cycletimes.Press [9] [1] in service mode*When releasing this mode, pressthe [POWER] button on Front Panelmore than 10 seconds.Error code initialization Initialization of the last error code held bytimer (Write in F00)Press [9] [8] in service mode.Initialize Service Last Drive Error, Error history and ErrorCodes stored on the unit are initialized tofactory setting.Then VHS Microprocessor is initialized toshipping setting too.Press [9] [9] in service mode.Finishing service mode Release Service Mode. Display in STOP (E-E) mode. Press power button on the frontpanel in service mode.24DMR-ES30VP / DMR-ES30VPC