Item FL display Key operationMode name Description (Remote controller key)RAM Drive Last Error RAM Drive error code display.*For details about the drive error code, referto the Service Manual for the specific RAMDrive.1. Error Number is displayed for 5seconds.2. Time when the error has occurredis displayed for 5 seconds.DD: Dayhh: Hourmm: Minute3. Last Drive Error (1/2) is displayedfor 5 seconds.4. Last Drive Error (2/2) is displayedfor 5 seconds.5. Error occurring Disc type isdisplayed for 5 seconds.6. Disc Maker ID is displayed for 5seconds.7. Factor of Drive Error occurring isleft displayedPress [4] [2] in service mode.When “INFO******” is beingdisplayed, past 19 error historiescan be displayed by pressing [0] [1]- [1] [9]In case that the maker cannot beidentified, display is black out.Delete the Last DriveErrorDelete the Last Drive Error information storedon the DVD RAM-Drive.Press [9] [6] in service mode.Laser power confirmation Drive state is judged based on differencebetween laser power value at shipping andpresent laser power value.If DVD-RAM disc in not inserted,[NO DISC] is displayed.If power value study was filed,[ERROR] is displayed.1. into RAMDrive in service mode. (Othermedia are assumed to be non-correspondence.)2. Press [4] [4].Turn on all FL/LEDs All segments of FL and all LEDs are turnedon.All segments are turned on. Press [5] [1] in service mode.S1 signal output Forcibly superimpose the S1 signal (approx.4.5V DC) on the EE chroma signal, and checkthe output on the S terminal.Press [5] [2] in service mode.S2 signal output Forcibly superimpose the S2 signal (approx.2V DC) on the EE chroma signal, and checkthe output on the S terminal.Press [5] [3] in service mode.23DMR-ES45VP / DMR-ES46VP
