(ENG) VQT4V81 23∫ About storage and inspection after use• Always take the digital camera out of the Case.• Make sure that no dirt or dust is stuck to the O-ring.• When storing, remove the buckle so that the marine case will not be closed airtight.• We recommend that the Case be inspected about 3 years after purchase. Thisinspection involves dismantling and cleaning the Case, inspecting all the parts andrepairing them if necessary and checking the waterproofness of the Case using thesame hydrostatic test equipment that was used to check the waterproofness beforepurchase. The customer is responsible for all transportation costs.• Do not dismantle any parts or use any accessories not specified in these operatinginstructions and do not alter the Case. If the Case does not work properly, consultyour dealer.Specifications¢ Refer to the operating instructions, catalogue, website etc. of the digital camerafor the latest information on models that can be used.Compatible model DMW-MCTZ40:DMC-TZ40/DMC-TZ41/DMC-ZS30/DMC-TZ37/DMC-ZS27DMW-MCTZ35:DMC-TZ35/DMC-TZ36/DMC-ZS25(As of January 2013¢)Dimensions Approx. 151 mm (W)k94 mm (H)k103 mm (D)[5.94q (W)k3.70q (H)k4.06q (D)](excluding the projecting parts)Mass (Weight) Approx. 480 g/1.058 lb (including the diffuser)Material PolycarbonateWaterproof construction O-ring sealingWater resistant depth 45 m/148 feetOne Panasonic Way, Secaucus, NJ 07094Panasonic Consumer Marketing Company of North America,Division of Panasonic Corporation of North AmericaPanasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Panasonic Corporation 2013 Printed in Japan