Panasonic DMW-YAGHPP Owner's Manual

Contents

Panasonic DMW-YAGHPP Owner's Manual Manual pdf 12 page image

12 VQT5K48 (ENG)Additional MenusWhen the unit is mounted on the digital camera, an additional menu will appear in the digitalcamera’s display.Be sure to read the digital camera’s manual together with this document.yyMenu settings are registered to the digital camera when you turn it off.Motion PictureInterface Unit Settings for the interface unitAudio Input SelectSelect the audio to input to the digital camera.yy[BODY]:Input audio from the digital camera’s internal microphone or from theexternal microphone connected to the digital camera.yy[XLR]:Input audio from the equipment connected to this unit’s AUDIO IN[CH1, CH2] terminals.When this is selected, the [Lens Noise Cut] setting will be fixed at[OFF].SDI RemoteRecordingSelect whether to output control information for recording start/stop tothe external equipment connected to this unit’s SDI OUT terminals.yy[ON]: Enable the function.yy[OFF]: Disable the function.LED Brightness Specify the brightness of the level meters.yy[HIGH], [LOW]3G-SDI TypeSelect the type of signal that will be used when outputting 3G-SDIsignals.yy[LEVEL A], [LEVEL B]Low Battery AlertSelect the voltage at which to display the low battery (voltage decline)warning for the DC power battery.yy[11V], [12.5V], [13.5V], [15V]The indicator will turn red and blink before the battery charge isempty.Replace the battery when the battery charge is low and “InterfaceUnit: Low Battery Alert” is displayed.