Panasonic DP-150FX Operating Instructions Manual

Also see for WORKIO DP-150FX: Operating instructions Operating instructions Overview Specifications Operating instructions

Contents

PROGRAMMING YOUR MACHINE3634 ENERGYSAVETIMERPOWERSAVETIMER1 5 min. To reduce the power consumption in standby, select either Energy-Saver or Sleep mode and specify the Delay Time (5 to 240minutes) for the machine to enter into the selected mode.The Delay Timer setting is only available in the Energy-Saver orSleep Modes.Energy-Saver Mode: Saves energy by consuming less power thanwhen in standby mode by turning off the fuserunit after the specified time.Sleep Mode: This is the lowest power state that themachine enters after the specified timewithout actually turning off.*2 153 304 605 906 1207 1808 240AUTO OFFTIMER1 5 min.*2 303 604 905 1806 24035 DAYLIGHT TIME 1 Invalid Selecting whether the clock adjusts for Daylight Saving Timeautomatically. The built-in clock will advance 1 hour at 2:00 am onthe first Sunday in April and fallback 1 hour at 2:00 am on the lastSunday in October.*2 Valid36 RING PATTERNDETECT (DRD)(See Note 2)*1 Invalid All ring patterns.2 Valid Select a ring pattern for automatic answering.1: A Standard ring pattern.2: B Double ring pattern.3: C Triple ring pattern (Short-Short-Long).4: D All other triple ring pattern, except the type Cdescribed above.37 RCV TO MEMORY(----)Enter a 4-digit password used to print out the received documentin memory by using F8-2 (RCV TO MEMORY). When F8-2 is setto On, this parameter will not be shown on the LCD display. (Seepage 66)39 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a numberwith PIN Code. (See page 72)2 Suffix3 Prefix52 DIAGNOSTICPASSWORD (----) Setting the password for Remote Diagnostic Mode. Please askyour Panasonic Authorized Dealer for details.53 SUB-ADDRESSPASSWORD (----) Setting a 20-digit password for secured sub-addresscommunication.Continued on the next page.No. Parameter SettingNumber Setting CommentsFax Parameters