Panasonic DP-1810F Operating Instructions Manual

Also see for DP-1810F: Operating instructions Operating instructions Service manual Technical guide Operating instructions

116 5 43 2- . / 10=;Control PanelNo Contents Refer to4INTERRUPT Key, MEMORY IN Key, M1/M2 KeysC Interrupt Key interrupts other copy or print jobs while making copies.C Memory In Key registers two copy jobs for recall at a later time.C M1/M2 Keys are used to store a Job in Memory or to recall a Job stored in Memory.Pages 21, 235 Cursor Keys CCCCC Select copy ratio and function modes using (G or F). ——6 PAPER TRAY Key CCCCCUsed to select the paper tray manually. ——7 COPY SIZE KeyC Used to select Reduction/Enlargement only. For additional details, see page 13. ——8 ORIGINAL SIZE KeyC Used to select the original size manually. For additional details, see page 13. ——9 PRINT Key CCCCC When selecting the Printer ON/OFF Line. ——NOTE C The Control Panel displayed above shows only copier functions. Please referto the appropriate operating instructions for the control panel functions or inthe Panasonic Doccument Management System CD-ROM for the Printercontrol panel functions.∗ When the machine detects a problem or an alarm status is activated, the ;Alarm LED lights up or begins to flash.LED Lights: Machine detected a trouble statusC No paper in the selected tray or toner has run out.C Machine detected trouble, such as paper misfeed or jam.LED Flashes: Machine detected an alarm statusC No paper in the tray. (Tray not selected)C Running low on toner, etc.Before Starting: COPY Key CCCCC Press when using the unit as a photocopier. ——J Add Paper? Add TonerI Misfeed2 Call ServiceWarning IndicatorsLCD Display; Alarm LED (Red) CCCCC Lights when trouble occurs.* ——= Active LED (Green) CCCCC Lights when machine is active. ——