Sending Documents via LAN125Manual Email AddressingInternet FaxFeaturesNOTE 1. If your machine sounds an alarm (pi-pi-pi) when pressing the KEYBOARD Button, or anyAddress Book entries that contain an email address, one, or more of the required 5 BasicInternet Parameters may have been omitted in the User (Internet) Parameter(s). (See page122)2. If you want to specify two, or more destinations, press after completing the full emailaddress so you can select another destination.3. If the transmission cannot be completed for any reason, the email may be returnedundelivered; otherwise no reply will be printed.4. For the machine to perform the email address completion the Fax Parameter No. 160(DEFAULT DOMAIN) must be set to "Valid", and the DEFAULT DOMAIN must bepreprogrammed in the User (Internet) Parameters. (See pages 122, and 195)5. The “QUICK MEMORY TRANSMISSION” feature is disabled if multiple stations are set.3c If you want to send to a different Domain, choose the desired domain fromDomain List.(See Note 4)Ex: abc4 You can add up to 70 additional full email addresses.5The document(s) begin to store into memory with a file number.Then starts connecting to the LAN immediately after storing the first page.(See Note 5)While sending the document(s) via LAN, the remaining page(s) continue tostore into memory.panasonic.comEnter Addr(TO) STN(s):000Enter Station(s)abc@panasonic.com_panasonic.comworld.service.commgcs.co.jpabc-net.wxy.comOKOK
