Panasonic DP-C213I Operating Instructions Manual

Contents

43Chapter 2 More Menus FeaturesFrom 1-Sided Originals to 2-Sided Copies using Saddle Stitch(Booklet)z The 2-Sided original cannot be copied into a booklet.z Originals should be placed on the ADF. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 40 originals)z Saddle stitch binding is possible only when the optional 1-Bin Saddle Finisher (DA-FS325) is installed.Ledger (11" x 17"), and Letter-R (8.5" x 11") are the only applicable paper sizes.z The standard setting for the copy size is the reduced size, however, the setting can be changed to a “originalsize”. Refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.z When the Fold Position is not matched with center position of the copies, set the binding margin. Refer toGeneral Settings (For Key Operator) in the Operating Instructions (For Function Parameters) on the providedCD-ROM.z Stamping can be combined with the Booklet For Copying with Stamping, refer to Copying with Stamping (seepage 61-69).1 Select “2-Sided / Original->Copy”,and then select “Booklet”.z To display this screen, refer to steps 1 to 3 ofBasic Operation for the 2-Sided CopyMode (see page 40).2 Select a bind position.3 Select the cover page type ifnecessary.1 Select “Cover”.Select when binding the leftside, or the top side of thepage.Select when binding theright side, or the bottomside of the page.Continue on the next page...