6 RQT8685STEP 1 Connection to a television∫ Enjoying multi-channel surround sound∫ Connect the AC mains lead last[DVD-K32] only∫ Connect to the ground terminalChange “DOWN SAMPLING”, “DOLBY DIGITAL”, “DTS” and “MPEG§” (➜ page 15,“AUDIO” tab).§ [The\United\Kingdom,[Australia\and\N.Z.\FOR THE UNITED KINGDOM ONLYREAD THE CAUTION FOR AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.Unit with PX printed on the outer packagingIf the power plug does not fit your AC outlet, use thepower plug adaptor (included).If it still doesn’t fit, contact an electrical partsdistributor for assistance.PRPBYCOMPONENTCOMPONENTVIDEO OUTPlease connect directly toy TV.VVRLCOAXIAL INAmplifier with a built-indecoder or a decoder-amplifier combinationCoaxial cableBack of the unitRLAC INAC mains lead (included)To household mains socketConfiguration of the AC inlet differs according to the area.EARTHSIGNALTo the ground terminalGround the unit by connecting a copper wire to the screw on the back of the unit andthe ground terminal to prevent static electricity buildup caused by the karaokemicrophone.STEP 2 The remote control∫ Batteries ≥ Insert so the poles (i and j) match those in theremote control.≥ Do not use rechargeable type batteries.Do not:≥ mix old and new batteries.≥ use different types at the same time.≥ heat or expose to flame.≥ take apart or short circuit.≥ attempt to recharge alkaline or manganesebatteries.≥ use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakagewhich can damage items the fluid contacts and maycause a fire.Remove if the remote control is not going to be usedfor a long period of time. Store in a cool, dark place.∫ UseAim at the remote control sensor (➜ page 8), avoidingobstacles, at a maximum range of 7 m directly in frontof the unit.R6/LR6, AAConnection to a television/The remote controlRQT8685-2B.fm Page 6 Tuesday, April 25, 2006 9:05 AM