Panasonic DVD-K33 Operating Instructions Manual

Contents

8 RQTC0126Basic playStandby/on switch (Í/I)Press to switch the unit from on to standby mode or vice versa. In standby mode, the unitis still consuming a small amount of power.[Note]≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫]when you finish to preserve the unit’s motor and your television screen.≥ Total title number may not be displayed properly on iR/iRW.Stop1Power ON. 2Open the disc tray.3Load the disc. 4Start play.Remote control sensor≥ Load double-sided discs sothe label for the side youwant to play is facing up.Skip≥ Press [:9] to skip chapters, tracks, etc.StopThe position is memorized when “!” flashes on the display.≥ Press [1] (PLAY) to resume. (Resume play)≥ Press [∫] to clear the position.Search (during play)Slow-motion (during pause)≥ Up to 5 steps≥ Press [1] (PLAY) to restart play.≥ [VCD] Slow-motion: forward direction only≥ [MPEG4] [DivX] Slow-motion: Does not work.Pause≥ Press [1] (PLAY) to restart play.If you are experiencing problems, refer to troubleshooting guide (➜ 20, 21).Basic play8RQTC_0126_K.fm Page 8 Friday, January 19, 2007 5:12 PM