Panasonic DVD-LS55 Operating Instructions Manual

Also see for PalmTheater DVD-LS50: Operating instructions Operating instructions Operating instructions

29RQT7424§ [For[Asia[ MPEG is not available.No response when anybuttons pressed. ≥Some discs prohibit certain operations.≥If there is no response at all, the unit may have been affected bylightning or static electricity. Turn the unit off and on again. Alternatively,turn the unit off, disconnect the power source (AC or battery pack),reconnect the power and turn the unit on again.Play fails to start orstops soon afterstarting.≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.≥This unit cannot play discs other than those specified. (5)≥Clean the disc. (27)≥Ensure the disc is inserted correctly. (8)≥Check that the disc has something recorded on it.No response whenremote control buttonspressed.≥Check that the battery is installed correctly. (7)≥The battery is depleted: Replace it with new ones. (7)≥Point the remote control at the remote control sensor and operate. (7)Cannot add markers. ≥You cannot add markers while playing a playlist or discs that do notshow the elapsed time.There are alreadymarkers. [RAM] ≥The unit reads and displays the markers added with a DVD videorecorder.There is a lot of noise. ≥Move unit away from mobile phones.≥Noise may occur when playing WMA files.No sound from theunit’s speaker. ≥The speaker is off if the LCD is closed or headphones are connected.≥Turn up the volume. (8)No sound from otherspeakers. ≥Check all connections and settings. (20), (21), (22)Cannot play multichannel surroundsound≥Output is in stereo (PCM) if you have changed the play speed.≥This unit plays DVD-Audio in 2 channels.Distorted sound. ≥Turn Advanced Surround off if this occurs. (11)Piercing noise comesfrom the speakers. ≥If you have connected a digital amplifier which does not include adecoder, be sure to select “PCM” in “Dolby Digital”, “DTS DigitalSurround” or “MPEG§” in “Audio”. (20)Sound effects do notwork. ≥Dialogue enhancer and Advanced Surround do not work when the unitis outputting bitstream signals. (20)≥Advanced Surround does not work if you have changed the play speed.(16)≥Some audio effects do not work or have less effect with some discs.Cannot record to digitalrecording equipment.(Incorrect soundrecorded.)≥You cannot record WMA/MP3.≥You cannot record DVDs that have protection preventing digitalrecording.≥You cannot record DVDs if the recording equipment cannot handlesignals with a sampling frequency of 48 kHz.≥Make the following settings:– Advanced Surround: Off (11)– PCM Digital Output: Up to 48 kHz (20)– Dolby Digital/DTS Digital Surround/MPEG§: PCM (20)OperationSoundTroubleshooting guide

/ 32

Related manuals for Panasonic PalmTheater DVD-LS50