Panasonic DVD-LS87 Operating Instructions Manual

Also see for DVDLS85: Operating instructions

10RQT8431Useful functionsRepeat play (Only when the elapsed play time can be displayed.For JPEG, you can use even if there is no elapsed time display.)To repeat a specified section (A-B Repeat)Except [JPEG] and [RAM] [DVD-RW[‹VR›] (still picture part)Changing play speed [RAM] [DVD-RW[‹VR›] [DVD-V]Enjoying virtual surround (Advanced Surround)[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] (2 or more channels)A surround sound effect can be made using 2 speakers (on other equipment).≥ When using headphones, press to select “HP 1 Natural” or “HP 2 Enhanced”.≥ When using discs recorded with surround sound, sound seems to come from speakers on eitherside of you.≥ Optimum seating position is 3 to 4 times the distance between the front left and right speakers or thewidth of the television if using the television’s speakers.≥ Do not use in combination with surround effects on other equipment.≥ To exit the screen : Press [RETURN].Press several times to select the content torepeat.≥To exit the screen : Press [RETURN].Repeat OffMenuENTERENTER A-B RepeatMenuDISPLAYDISPLAY1 2Press once.1 Press [34] to selectOther Settings.2 Press [1] to go to the nextmenu and [34] to select“Play Menu”.3 Press [1] to go to the nextmenu and [34] to select“A-B Repeat”.4 Press [ENTER] at the startingand ending points.≥ Press [ENTER] again to cancel.≥ To exit the screen : Press [RETURN].ENTERENTERDISPLAYDISPLAY1 2 1 Press [34] to select Other Settings.2 Press [1] to go to the next menu and [34] toselect “Play Speed”.3 Press [ENTER] and [34] to select“Normal” or “k0.6” to “k1.4” (in 0.1 units).4 Press [ENTER].≥ Press [1] (PLAY) to return to normal play.≥ After you change the speed– Advanced Surround (➜ below) and Multi Re-master (➜ page 12) do not work.– Digital output switches to PCM-2ch.– 96 kHz sampling frequency is converted to 48 kHz.≥ This may not work depending on the disc’s recording.≥ To exit the screen : Press [RETURN].Press once.A.SURROUNDA.SURROUNDPress to select “SP 1 Natural” or “SP 2 Enhanced”.Useful functions