34 35RQT5900RQT5900For Your ReferenceFor Your ReferenceThese settings are not necessary when using a wide-screen television (16:9).Preparations≥Turn on your television and the unit (➡ page 15, “To turn the unit on”).≥Switch the video input mode on the television to suit the type of connection you havemade.While stopped1 Press [SETUP] or [MENU] to display the initial settings screen.2 Use the cursor jockey [3, 4] to select “5 TV Aspect” and press [ENTER].3 Use the cursor jockey [3, 4] to select the TV aspect and press [ENTER].≥4:3≥Select when a conventional television is connected.≥16:9≥Select when a wide-screen television is connected or when the unit’s LCD is used.4 Press [RETURN] to finish the setting.∫ To return to the previous menuPress [RETURN].NoteSelect “16:9” when using the unit’s LCD without connecting a TV set.Factory PresetConnecting to a televisionAUDIO VIDEOS VIDEO OUTIN/OUTOPT OUT DC IN 9VUse the S videocable when connec-ting the unit to a TVset equipped withan S video input ter-minal for the bestpicture clarity pos-sible.TelevisionAudio/videocable (supplied) S video cable(yellow)(black)(red) (yellow)(white)Either of theseThis unitS video/video inputterminalS video outputterminalAudio inputterminalConnect Your Portable DVD/Video CD/CD Player Directly To Your TelevisionIf the unit is connected to the television through a video cassette recorder, the picturemay not be played back correctly due to the copy guard. So we strongly recommendyou do not connect the unit to your video cassette recorder when setting up yourhome entertainment system.Enjoying a larger screenSelecting TV screen typeNote≥Additional equipment and cables are not supplied.≥During DVD play, TV volume may be lower than during TV broadcasts, etc. If you turn thevolume up while playing DVD, ensure that you reduce the volume again before playingother sources so that a sudden increase in output does not occur.